Hi Jimmy,
Thanks for your interesting question.
For case 1 my answer is SDD35 and for case 2 my answer is SDD32. I answer this way because FEXT and NEXT are measured at the receiver.
Best Regards,
Nick
Hi Far,
The default flat gain value in I2C mode is 0dB. In data sheet Table 7-12, flat_gain[2:0] shows a reset value of 0x5, which corresponds to 0dB in Table 7-2.
Best,
David
Part Number: DS160PR810 Tool/software: hi team,
customer want to check because the board size constraint, if can make 2pcs redriver thermal pad to be completely overlapping on top layer and bottom layer?
and then reduce the number of thermpad via to avoid…
Hi Sandhya,
At 10Gbps Nyquist is at 5GHz. Please note DS160PR810 CTLE gain vs frequency below. There should be some gain at 5GHz.
To really see this gain at 5GHz, it would be best to use a Network Analyzer. Alternatively you use IBIS-AMI model as well…
Part Number: DS160PR810 Other Parts Discussed in Thread: DS160PR410 In the DS160PR810 manual, two DS160PR810 devices can be configured as a Dual X4 PCIe Link.,Can a single DS160PR810 be configured as a dual x2 PCIe link?
Part Number: DS160PR810 Tool/software: hi TI Team :
we wanted to design our hardware boards to achieve PCIe X8 long distance transform by DS160PR810; the tx link is CPU --> DS160PR810 -> optical fiber --> DS160PR810 ->FPGA; the rx
link is FPGA…
Part Number: DS160PR810DS160PR810 的每条 (on each pin) TX/RX 数据线上都有 (all on the data line) ESD 吗?
我应该添加额外的 (I should add additional ) PCIE ESD 组件吗 (component) ?
Part Number: DS160PR810 Other Parts Discussed in Thread: USB2ANY Hello team, We are using DS160PR810 redrivers for our application to boost the signal strength from root complex to an end device. Please find the test setup below, We're connecting the SigCon…
Part Number: DS160PR810 Hello,
We are using the DS160PR810EVM and plan to potentially use the DS160PR810 device. I successfully installed SigCon v3, but the DS160PR810 part is not in the device list. I believe I need the DS160PR810 profile updater but cannot…