Part Number: DS160PR810 Hi team,
My customer is referring to the following diagram in the datasheet as they are working on their design:
The diagram includes AC coupling caps on the RX side of the redriver, but PCIe spec says AC coupling caps are handled…
Part Number: DS160PR810
Dear support,
My customer plan to use DS160PR810 as PCIe Gen 4 redriver products.
We are trying to use Sigcon Architect for config. But I am not able to find DS160PR810 updater in snlc056a.zip.
Can you advise
Programming guide…
Part Number: DS160PR810 When the DS160PR810 is setup in Pin Mode, then is the I2C bus is available.
One concern is that the EQU0_0 and EQU1_0 pins, which sets the equalization values in pin mode are also the I2C address pins. These pins, in either mode…
Part Number: DS160PR810 Other Parts Discussed in Thread: DS125BR820 , Hi
Can PCIE Redriver be used on sas? Want to use DS160PR810NJXR((Repeater,PCIe 4.0)) Replaces DS125BR820NJY((SAS3_REPEATER))
Part Number: DS160PR810 Hi
1,When using the DS160PR810NJX Repeater, I encountered the problem of unsmooth wiring. When the balanced line goes to the IC, the P & N are just reversed Please help to confirm, whether the P & N of the Repeater can be…
Part Number: DS160PR810 Hi team,
My customer has a project using our redriver (P/N: DS160PR810NJXR) and there are few questions would like to consult with you
Due to the layout placement, customer need to swap the PCIE polarity.
There are kind case that…
Part Number: DS160PR810EVM-RSC Other Parts Discussed in Thread: DS160PR810 hello team,
I am trying to install SigCon architect for DS160PR810 evaluation board . Which version of SigCon and NI i need to install? and In the website there are no redriver…
Part Number: DS160PR810EVM-RSC Other Parts Discussed in Thread: DS160PR810 , DS160PR410 hello team,
I am looking for the DS160PR810 Programming Guide (SNLU268) and Understanding EEPROM Programming for PCI-Express 4.0 Redrivers (SNLA342) documents mentioned…
Part Number: DS160PR810 Other Parts Discussed in Thread: DS320PR810
Dear Support,
1. DS160PR810 has internal PRBS pattern injector - can you please share if there is any documentation on how to enable and test the optics with internal test pattern
…