Part Number: DS25BR100 Other Parts Discussed in Thread: DS25CP104A , DS25BR120 , DS25CP102 , DS25BR110 , SN65LVDS31-33EVM Tool/software: Dear All,
I'm looking for the most suitable LVDS buffer/repeater/re-driver for the application below.
Three SPI signals…
Part Number: DS25BR100 Tool/software: I am designing a board that will drive the 1.28Gbps LVDS signal from DS92LV16TVHG using DS25BR100 and send it to DS92LV16TVHG on the other board. A 50cm Cat5e Ethernet cable is used between the two boards. According…
Part Number: DS25BR100 Other Parts Discussed in Thread: DS25BR110
Hi, Support Team
about DS25BR110TSDX can support SGMII interface? is it ok to connect VCC to 3.3V? This VCC is independent of input interface, correct?
if not, have other TI parts can meet…
Part Number: DS25BR100 Hi all,
I am investigating the DS25BR100TSD/NOPB and am looking for the following parameters below. Note that I am not looking for the maximum allowable junction temperature, but for this intent and purpose I need to see what the…
Part Number: DS25BR100 Dear Team,
when i'm doing layout can i change the P and N lanes?
eg.
connect the LVDS_IN_P signal to pin 3
connect the LVDS_IN_N signal to pin 2
connect the LVDS_OUT_P signal to pin 6
connect the LVDS_OUT_N signal to pin …
Part Number: DS25BR100 Hi team,
My customer is using SL83014 as Serdes for 4m coaxial-cable in their medial endoscope application.
And right now they want to use our DS25BR100 to improve their long distance transmission performance.
Could you please kindly…
Part Number: DS25BR100 Hi, team:
Nice to meet you!
My customer use DS25BR100 for transmit and receiver, and data rate is 3.125Gbps, I want to know how much loss that device could stand?
Is 14db or 8db?
Hi,
We have not characterized DS25BR100 with different loading capacitance, and I would recommend you use the DS25BR100 IBIS model to simulate the different loading condition or an EVM for actual physical measurement. The IBIS model is available at this…