Part Number: DS25BR204 Other Parts Discussed in Thread: DS25BR100 Hi team,
The customer would like to verify if the jitter range of his input signal can meet DS25BR204.
His parameters of his input signal are as below:
The input signal is LVDS signal…
Part Number: DS25BR204
How does the “PWDNn” Signal work? Does this signal tri-state the individual LVDS output buffer? Its not clear to me in the datasheet what is the voltage on the output of the buffers when PWDNn is asserted.
Both the output…
Hi Daniel,
I don't believe this would work since FPD-Link III devices have a continuous, bi-directional channel. The DS25BR204 is unidirectional so it wouldn't be compatible, and I'm not aware of any other muxes/repeaters that are bi-directional.
…
Part Number: DS25BR204 Dear sir,
Our customer is using DS25BR204. And they measured the IC temperature is about 60 degreeC when operating.
They want to ask is it normal?? The temperature performance is okay or not??
Part Number: DS25BR204 In the data sheet for thermal resistance, there is a Theta JC & Theta JA defined. How is Theta JC defined? As the resistance between the junction temp and the top of the case? Or the resistance between the junction and the thermal…
Part Number: DS25BR204 Hello,
I'm working on a LVDS repeater DS25BR204. I am having a hard time getting a stable output signal. My input signal is 0.8 - 2.0V 10 MHz. Should the input voltage have less swing, or should frequency be higher.
Regards…
Other Parts Discussed in Thread: DS25BR204 Hi,
I'm looking for the phase noise plot of DS25BR204, but I could not find it in the datasheet. I did see phase noise plots from other vendors and would like to see one from TI for comparison. Or if anyone…
Part Number: DS25CP104A Other Parts Discussed in Thread: DS25BR204 , Tool/software: Hi TI team.
Could you please provide information on the IO state of the output pins when /PWDN=L?
Regards, Matsumoto
Part Number: DS25BR440 Other Parts Discussed in Thread: DS25BR204 , Two questions:
Is the DS25BR440TSQ/NOPB compliant with the TIA/EIA-644-A LVDS Standard?
Another E2E post recommends inputs on the similar DS25BR204 are terminated with 100 Ohm resistors…
