Hi Ian,
This is a legacy old mature product and there is not a reference schematic or design.
One idea, customer can consider DS25CP104. This device has reference design and it has small cross point functionality. Please recommend this to your customer…
Part Number: LMH0056 Other Parts Discussed in Thread: DS25CP104A Hello! I want to design and build a small HD-SDI video switcher for four inputs and two outputs with both PGM and PVW buses and one type of transition - CUT. Is it possible to use the built…
Hi Alex,
This may work for low speed signals. I would recommend to use the DS25CP104A to perform the 1:4 operation internally. This allows a much higher bandwidth path through to the 4 destinations.
Regards,
Lee
Hi Andrei,
Andrei Ziganshin said: Just would like to confirm that a single LMH0397 is capable of equilizing 2 separate inputs? Or do I connect the first two inputs (INPUT1, INPUT2) to LMH0397 which is configured as Cable Driver mode for switching first…
Part Number: SN65LVCP40 Other Parts Discussed in Thread: DS25CP104A , DS42MB200 Hello,
i need to interface many LVDS input signals to two SN65LVCP40 mux.
All LVDS signals comes from a dedicated connectors.
The outputs of the two SN65LVCP40 (mux…
Hi Richard,
I don't believe TDP0604 would comply with your system's need. I'd like to make a recommendation of DS25CP104A instead. Please take a look at the electrical characteristics of this datasheet; for output common mode, this could be AC coupled…
Greetings,
At 3Gbps data rate, we should not connect outputs in parallel.
Suggestion is to use four LMH0324 or LMH0344 and then send outputs to DS25CP104 - 4X4 LVDS cross point. LMH0324 has better performance and lower power consumption than LMH0344…
Hi Itoh-san,
Is there some way to implement the crosspoint/fanout on the oLDI data (between 287 Tx and 288A Rx) instead of the LVCMOS data (between 288A Tx and 287 Rx)?
Typically we would recommend an LVDS crosspoint so that you can take the oLDI…
