The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.



Search tips
Showing 14 results View by: Thread Post Sort by

  • DS26C31MQML: What is the difference between a DS26C31 and an AM26C31?

    Part Number: DS26C31MQML Other Parts Discussed in Thread: AM26C31 Hello. What is the difference between a DS26C31 and an AM26C31? The issue I'm working is a fault where the DS26C31 works, but in the same application the AM26C31 does not work.
    • Answered

  • DS26C31MQML: DS26C31MJ/883 and 5962-9163901MEA

    Resolved
    Part Number: DS26C31MQML Other Parts Discussed in Thread: AM26C31 Hi Team, the customer has a question about military number of the 2 product below. DS26C31MQML datasheet: https://www.ti.com/lit/ds/symlink/ds26c31mqml.pdf?ts=1612499871842&ref_url=https…
    • Resolved

  • DS26C31MQML: about the failure mode

    Part Number: DS26C31MQML Other Parts Discussed in Thread: SN65HVD78 , Hi, I'm daejin I am using the part for 422 communication. the 422 communication test result used the part is success. but, unfortunately after test I found an odd problem during to…
    • Answered

  • DS26C31MQML: Failure mode and effect (Redundancy Structure)

    Resolved
    Part Number: DS26C31MQML Other Parts Discussed in Thread: AM26C31 Hi, I'm daejin As seen in the related question, I configured the redundancy structure using 2ea DS26C31MQML. When the primary channel driver is working, VCC power is not applied to…
    • Resolved
    • Answered

  • DS26C31MQML: Recommended Decoupling Capacitor

    Resolved
    Part Number: DS26C31MQML Hi Im daejin I will use all channels of the part, and I will closely place a 120 ohm termination resistor on receiver input. Therefore, a lot of current consumption is expected to driver(DS26C31MQML). Could you tell me the recommended…
    • Resolved
    • Answered

  • DS26C31MQML: How to handle unused pins

    Resolved
    Part Number: DS26C31MQML hi Im daejin How to handle unused input pins among 4-channel pins? Pull down of floating? thank you
    • Resolved
    • Answered

  • DS26C31MQML: How to handle unused pins #2

    Resolved
    Part Number: DS26C31MQML wade, i'm couldn't understand your answer. I'm going to show you a simple circuit related to the question. I do not use B, C, and D channels, therefore they is be floating. (red "X" is floating(not connected) )…
    • Resolved

  • DS26C31MQML: DS26C31MW/883=5962-9163901MFA ?

    TI Thinks Resolved
    Part Number: DS26C31MQML Hello Im sooyeon lee working in Satrec Initative in south korea. There is no ordering information of SMD part number in DS26C31MW part page. But in the datasheet, the device marking of DS26C31MW/883 = 5962-9163901MFA. Is it need…

  • DS26C31MQML: Reading date code

    TI Thinks Resolved
    Part Number: DS26C31MQML Hello, Could someone explain the meaning of "D" and "9A" on the 1517D 9A marked on this DS26C31MQML? thank you Andrew
    • Answered

  • DS26C31MQML: Non-operating (no power supply), is the output pin of the part high impedance?

    Resolved
    Part Number: DS26C31MQML Hello I am daejin kang The power is supplied to this part, is the output pin of the part high impedance? thank you
    • Resolved

Didn't find what you are looking for? Post a new question.