Part Number: DS64MB201 Tool/software: The datasheet states that the differential inputs have a gated on-chip termination of 50 ohms to VDD when "enabled". Is there something that needs to be done to enable this termination?
Part Number: DS64MB201 Tool/software: Hi
This is Jasper Yao, AFAE supporting Sensortech. I would like to check with you for the device promotion. Could you share the device that support 2 channels driver with similar or better PE/EQ capability? Thanks…
Hi Kevin,
I would make the following register changes for the DS64MB201.
Registers 0x18, 0x26, 0x2E, 0x35, 0x36, 0x43 = E8'h (set DEM to -3.5 dB)
Registers 0x17, 0x25, 0x2D, 0x34, 0x3B, 0x42 = 0F'h (set VOD to 1000mV)
Regards,
Lee
Hi Kevin,
Yes, that is correct. if ENSMB is high, RATE, TXIDELDO, TXIDELSO, FANOUT, SEL0, SEL1, VOD0, and VOD1 pins will function as described in the Pin Descriptions table of the datasheet.
Regarding SEL0 and SEL1, the pin settings will control…
Part Number: DS64MB201 I am using the DS64MB201. However, I am only using half the lanes, the other is unconnected. Can I leave it floating or does it need to be terminated?
Other Parts Discussed in Thread: DS64MB201 Hi,
I have some questions for DS64MB201. Would you tell me the information?
Q1
Regarding Vrx_dff, the specification is 0.1V(min)/1.2V(max). Is this same as 0.2(min)-2.4(max)Vpp ?
Q2
Would you provide…
Hello Vincent,
Could you provide register dumps for the DS64MB201 device under the following conditions?
When the SSDs are not recognized by the system
When the SSDs are recognized by the system
We would like to see if there are any changes…
Other Parts Discussed in Thread: DS64MB201 , DS100MB203 , DS125MB203 Hi,
Is there the possibility to get some ibis files for the DS64MB201?
Best Regards,
Kato
