Part Number: DS90C031 Hi, I am designing a product using DS90C031. When the power supply voltage VCC is turned off, the input voltage DIN exceeds the maximum rating (Vcc + 0.3V) by 0.1V for 10nsec. Since the ESD Rating (HBM 1.5kohm/100pF) for DS90C031 says…
Part Number: DS90C031 Hi, I read the user's guide (SLLA305A). Here, it can be read as "20μs or less is a very short time without damage." Is it correct to think that there is no problem even if the maximum DIN rating of DS90C031 is exceeded…
Part Number: DS90C031 Hi, I am designing a product that uses the DS90C031. What is the difference between the input voltage DIN maximum rating (Vcc + 0.3V) and the ESD rating (HBM 1.5kΩ/100pF 3.5kV)? (1) If Vcc=0V, wouldn't the maximum rating and ESD…
Part Number: DS90C031 In the scenario of an ESD pulse coming into the LVDS output, what would that look like? Is there an I/O schematic for this or a similar part?
Part Number: DS90C031 Hi Team,
There seems to be a difference in cost between DS90C031 and DS90C031B. Is there a difference in characteristics?
What exactly is the difference I would like to know.Why is the cost different?
Regards,
Kenji
Part Number: DS90C031 Other Parts Discussed in Thread: DS90C032 ,
Devices used: DS90C031, DS90C032 1. When the input to the LVDS driver was fed with a 5V,500 KHz clock signal, the DOUT+ line at the LVDS driver ouptut was seen as stuck at 1.2 V. At the same…
Part Number: DS90C031 Other Parts Discussed in Thread: DS90C032 , SN65LVDT14 Hello,
I am trying to communicate between two boards. One is using the DS90C031 and the other is using the SN65LVDT14. The RX device burnt up (actual burn mark) and failed when…
Part Number: DS90C031 Other Parts Discussed in Thread: SN65LVDS31 , DS90LV031A , Hi,
Iam using DS90C03 for my application with 3.3V supply voltage ,whether it will work or not???
if not work kindly provide a alternate part number with 3.3v supply and same…
