Part Number: DS90C124 Other Parts Discussed in Thread: DS90C241 , , , DS90C241-Q1 At the DS90C124 and DS90c241 ordering section, there are multiple parts listed. Can you please tell what is the difference between the following:
DS90C124 IVS /NOPB
DS90C1…
Part Number: DS90C124 Hi
I have question on product shelf life.
When I checked from TI website, the part " DS90C124IVS/NOPB " is a product supporting standard product shelf life. That means that TI packaged products is two years from the time…
Part Number: DS90C124 Hi,
I am starting with a product design that architecturally consists of a main board and a peripheral board. The main board would have an ARM Cortex A based SoC, and the Peripheral board a smaller 16 bit micro-controller or an…
Hello Brian,
The DS90CF384A's output can only strobe on the falling edge. There are a couple devices that have a user-selectable clock edge:
24-bit, 5-35MHz: DS90C124
18, 24, or 30-bit, 8-135MHz: DS90C3202
Thanks,
Kate
Hello Pieter,
Yes, the DS99R105/DS99R106 combination is a good alternative.
These devices are active in production since ~15 years and there is no discontinuity defined for any time soon.
Alternatively, you may select the DS90C241 and DS90C124. These do…
Other Parts Discussed in Thread: DS90C124 , DS90C241 Hello,
This is with reference to DS90C241/DS90C124.. wanted to know the reason as to why the PLL in serialiser (DS90C241) doesn't get locked to TCLK when VCC is powered due to which I don't get output…
Part Number: DS90C241 Other Parts Discussed in Thread: DS90C124 Hi,
I am planning to use the Serdes pair DS90c124 and DS90c241 in a design.
I use the serializer to serialize 24 signals (max frequency signal 10 MHz) and send them across a 5 meter CAT5e…
Other Parts Discussed in Thread: DS90C124 , DS90C241 Hi
DS90C124 In my design, you do not use the LOCK pin and ROUT21, ROUT22, ROUT23 of this device. Since it does not use these terminals, can I get you a open? Or termination is necessary?
Regards