Part Number: DS90C189-Q1 Hi Sir
May we know if DS90C189-Q1 can support 2 LVDS output? (May we know if DS90C189-Q1 can support 2 LVDS output? (odd/even each item need support 1280x720X 60 frams)
Bogey
Part Number: DS90C189-Q1 Hi
I am driving G156HTN02.0 LCD display thro DS90C189 in SIDO mode. I use 148.5MHz as pixel class and VSYNC, HSYNC and DE signals are good. But on display I get multiple windows like as attached pic. What could be the isssue…
Part Number: DS90C189-Q1 Hi,
We want to develop one common control card with DS90C189-Q1 Dual LVDS transceiver IC. This control card should be common to drive the various LCD panels as below. Which LCD lines mapping should be used for my application…
Part Number: DS90C189-Q1 Other Parts Discussed in Thread: DS90UH948-Q1 , DS90C387 Hi team,
I'm in need of either an HDMI-to-OpenLDI or RGB-to-OpenLDI device. I have found DS90C189-Q1.
On DS90C189-Q1, are the Open LDI lines DC Balanced? I couldn't…
Part Number: DS90C189-Q1 Dear TI:
Custom use ds90c189-q1 for RGB signal to LVDS signal. the RGB signal voltage is 3.3V.
But the datasheet shows all LVCOMS input pin are designed for 1.8V lvcoms logic. it's not matched.
can some effective solution…
Part Number: DS90C189-Q1 Hi, I have two questions on DS90C189-Q1:
1. For those pins stated "includes pull down", what's the value of the pull down resistor?
2. We want to use one board to drive two different LCD where one requires channel A and B…
Part Number: DS90C189-Q1 Hi,
I want to drive LVDS LCD display ,but my microcontroller support RGB. Because of this I use DS90C189-Q1. Now I design circuit(TI reference desing DS90C189-Q1) with jumpers, as pin to pin.But LCD is not working. I did not…
Part Number: DS90C189-Q1 Other Parts Discussed in Thread: DS90C387A Hi Sir
Does TI have single pixel to dual pixel solution ? beside 187 and 189-Q1
due to 189-Q1 is automotive grade and 187 is dual to dual (i know 197 could config to SIDO)
I would…
Hi Kevin,
As stated above the mapping is configured by how you connect the pins, not by any registers (this device doesn't have any registers).
In the application note I shared you simply need to follow the instructions in section 1:
1. Identify…
Part Number: DS90C189-Q1 Other Parts Discussed in Thread: DS90UB947-Q1 , Hi, I've a setup like this: uP-> DS90C189-Q1 (LVDS ser) -> DS90UB947-Q1 (FPDL3 ser)
- DS90C189-Q1 outputs two CLKs: OA_C and OB_C
- DS90UB947-Q1 has just one CLK input.
Could…
