Part Number: DS90CF384
Hi Team,
Can I interface 4 bit LVDS signals directly to "DS90CF384" IC receiver?
The display which we shall be using has 24-bit RGB signals and our proccessor has 4-bit LVDS signals terminated. So, we need to convert…
Hi Tanveer,
In a DS90C383-DS90CF384 system, the clock can only be toggled from the transmitter (DS90C383) side. The DS90CF384 does not feature a strobe select toggle.
Since the system architecture above does not include a DS90C383 transmitter, the clock…
Part Number: DS90CF384 Hi its Erginay from Vestel EVChargers Group. I have a question about LVDS Voltage an PLL voltage of DS90CF384 MTD.LVDS toRGB. I have a microprocessor which has LVDS Power Domain 1.8V. So What should be voltage of LVDS_VCC and PLL_VCC…
Part Number: DS90CF384 Hi Experts,
Good day.
I have a question about LVDS Voltage an PLL voltage of DS90CF384 MTD.LVDS toRGB. I have a microprocessor which has LVDS Power Domain 1.8V. So What should be voltage of LVDS_VCC and PLL_VCC of DS90CF384.
Regards…
Part Number: DS90CF384
Dear expert,
Can DS90CF384 support a spread spectrum Rx clock IN such as range from 29.75MHz to 30.25MHz?
What is the max spread spectrum clock range it is able to support?
Thank you,
Dylan
Part Number: DS90CF384 HI team,
I found there is not detailed PIN definition on the datasheet regarding DS90CF384 on the TI.COM.
And also the pin out picture, for example which pin is the pin 1, and pin 2 etc.
Could you please help to check ?
Thanks
…
Part Number: DS90CF384 Hi, friends!
We have this problem with DS90CF384A (illustrated in the picture, sorry for the picture's quality). Any gradients are displayed as illustrated. All nets correspond to User's Guide SNLA014A. What we can do wrong?…
Part Number: DS90CF384 Hi, I want to know why the DS90CF384 low bit has no output?
1. Input => LVDS VESA 8bit
2. Output => Low bit no data (R0, R1) (G0, G1) (B0, B1)
Part Number: DS90CF384 HI,
My customer would like to know how to set the Rxout pins which are not used? Should tie to high, low or floating is fine? Please help to check
What is the function with Rxout23(Res)? How to use? (floating, bypass GND or VDD…