Part Number: DS90CR481 Hellow
My customer is testing the DS90CR481 and have questions about the waveform of the TX Clock out (LVDS clock).
When measured by the customer, the TX clock in shows a duty ratio of 5: 5 as shown below. The TX clock out …
Other Parts Discussed in Thread: DS90CR481 Hi, I'm using the DS90CR481, data sheets say, LVDS clock signal shall be "1111000" or "1110000" pattern, but it's seems "11110000" and "111000" on DS_OPT applied high and BAL applied high of clock_in @100MHz…
Other Parts Discussed in Thread: DS90CR482 , DS90CR481 Hello~
As you know very well, /PD pin of DS90CR481 & DS90CR482 has internal pull-down resistor.
I'd like to know the internal pull-down resistor value of /PD pin in DS90CR481 & DS90CR482.
Thanks…
Hi Sakai-san,
I still have not received any update. It seems that we cannot just fix the pinout image without updating the entire datasheet to meet current TI standards, so it may take a long time if it's approved. It would be best for the customer…
