Part Number: DS90UB904Q-Q1 Hi Team,
Our customer encountered a problem with some batch of DS90UB904Q and would like to ask some diagnostic test to determine the causes the device to "reset"/loose PLL lock. Please see the details of his inquiry below…
Part Number: DS90UB904Q-Q1 Hi Team,
May I ask whether 941 can be compatible with 904?Because of cost, customer consider changing 926 to 904.
I know 941 is third, 904 is second is it backwards compatible?
Thanks!
Part Number: DS90UB904Q-Q1 Hi~
Customer looking for SERDES solution, which resolution is 480x240, more than18bit RGB(RGB666).
DS90UB903/904 is right solution?
Can I map video signal RGB666(18)+HS,VS, DE in series on (DIN0~20) <-> (ROUT0~20) at each…
Hello Pieter,
I am not sure if this device pair will work since the PCLK you are looking for is lower than 20MHz which is the minimum supported by this device.
You may use the following pair:
DS90UB903Q-Q1 SER - 18-bit Parallel input - 10-43MHz…
Hey Charley,
Thanks for the quick reply - I appreciate it! The customer understands the color depth / pixel clock frequency difference but was curious what the other difference in features are / needs to be aware of. Does FPD-link III have an adaptive…
Part Number: DS90UB926Q-Q1 Other Parts Discussed in Thread: DS90UA102-Q1 , , DS90UB904Q-Q1 , DS90UB902Q-Q1 , DS90UB914Q-Q1 , DS90UB914A-Q1 OUR CASE WILL USE FPD-LINK PARALLEL DESERIALIZER BUT HERE ARE POOR OF PARALLEL INTERFACE.
PLEASE SEE BELOW DIAGRAM…
Other Parts Discussed in Thread: DS92LX2121 , DS92LX2122 , DS90UB904Q-Q1 , DS90UB903Q-Q1 Can two deserializers (DS92LX2122) be driven from one DS92LX2121
Part Number: DS90UB960-Q1 Other Parts Discussed in Thread: DS90UB933-Q1 , DS90UB935-Q1 , DS90UB913A-Q1 , DS90UB953-Q1 Hi Team,
Have some questions on compatibility between FPD Link-III Devices:
1) The datasheets for many of the FPDLink-III components…
Part Number: DS90UR903Q-Q1 Hi Team,
I have a question.
Can DS90UR903Q and DS90UB904Q be connected? I think I can not connect.
Because UR DS90UR903Q is FPD-Link2. DS90UB904Q is FPD-Link3. I can not connect because the generation of IF is different…
Hi He Dong,
Nice e-meeting you.
If your system has the I2C master attached to the DES, i.e. looks like this: Imager / EPROM <--> SER <--> DES <--> SoC (I2C master), the only configuration you need is to define the IDx and Aliases on the DES as you…