Part Number: DS90UB914A-Q1 I have a D3RCM-OV10640-913 RUGGED CAMERA MODULE. I saw this camera mentioned in this forum before, so I know you guys are familiar with it. My question is, how must the ds90ub914 be configured to link to this camera? Device…
Part Number: DS90UB953A-Q1 Other Parts Discussed in Thread: DS90UB914A-Q1 , Hello,
if I connect a DS90UB953A-Q1 to a DS90UB914A-Q1, the line rate will limited to 1.4Gbps by the 914.
If I feed the 953 via a CSI link speed of more than 1.4Gbps (e.g…
Part Number: DS90UB914A-Q1 Good morning,
We are using the DS90UB914 in our design and we are verifying the interfaces. When measuring the I2C signals voltage levels we have the unexpected behaviour that the logic level '0' on both SDA and SCL is at…
Part Number: DS90UB914A-Q1 In order to perform back channel communication between UB914 and UB933, are the default values for each setting okay?
Or is there a register to change the setting?
Best Regards,
Part Number: DS90UB914A-Q1 Hello
I am using the TI913 & TI914 serdes.
The HW is as follow:
- image sensor --> TI913 --> Fakra cable --> TI914 --> ISP.
According to some ISP's registers, the signal which is arriving at the ISP is unstable.
Which…
Part Number: DS90UB914A-Q1 Hi Team,
For a 913/914 pair I have a few question about reaction to errors/losing lock:
- If a link is building a lot of parity and/or CRC errors will the AEQ automatically readjust?
- If the AEQ does readjust will we…
Part Number: DS90UB914A-Q1 Other Parts Discussed in Thread: DS90UB913A-Q1 Hello. I want to know how long it takes from Ser(ds90ub913a-q1) sending to ROUT0 output of Des(ds90ub914a-q1).
Best regards,
Part Number: DS90UB914A-Q1 Hi,
We met a IIC communication problem between 933 and 914. The signal flow is SOC->914->connectors & coax cable->933->ISP->image sensor. Clock signal flow is OSC(42Mhz)->933->ISP(84Mhz PCLK output)->933-> connectors & coax…
Part Number: DS90UB914A-Q1 Dear team,
Recently the customer finds that there are several camera displaying green screen. We dump the register and find that there are two register is different from normal cameras, 0x02 and 0x03. In the normal phenomenon…
Part Number: DS90UB914A-Q1 Hi,
OV10635(913) + 914 work ok
OV10635(913) + 954 + 953 + 954 + 953 + 914 does not work
Line sync signal lost in TI DS90UB914A-Q1, but frame sync signal and pixel clock are ok.
Does DVP to MIPI lose line sync signal…
