Part Number: DS90UB926Q-Q1 Tool/software: Hi,
Please feedback the following questions.
Is it unreasonable that how much time to produce how much CRC error count?
How long is reset CRC error register 0x04 bit 5?
CRC error count 11000 per second, no flickering…
Part Number: DS90UB926Q-Q1 Other Parts Discussed in Thread: DS90UB948-Q1 , , DS90UB925Q-Q1 , DS90UB947-Q1 Tool/software: Hello all,
I would like to be able to read the state of GPIO2 when configured as input in GPIO mode (see below on why I need to). I can…
Part Number: DS90UB926Q-Q1 Tool/software: Hi
If we enable the error count, how do i read this register to know how many Link Error had happen ?
Will we see this register value increase if link error happens ?
Part Number: DS90UB926Q-Q1 Tool/software: Hi team,
My customer uses 949-926-DLP to output a 800*480 display signal.
They tested DLP BIST mode and everything was normal.
Then they enabled 949 white pattern and found the screen was a bit blue.
They want…
Hello,
PYTsai said: And my customer are uisng coaxtial way (single end) to connect 925 and 926.
The 925 and 926 do not support coax (single-ended) connection. They only support STP differential connections. Although the video seems stable, using coax connection…
Part Number: DS90UB926Q-Q1 Tool/software: Hi,
The customer has a new HUD case and wants to confirm whether the TX DS90UB943A can match the RX DS90UB926Q?
Because End Customer often asks FPD Link which TX can match which RX.
Is there a relative matching…
Part Number: DS90UB926Q-Q1 Tool/software: Hi team，
The datasheet mentions that the BISTEN pin P44 has an internal pull-down. I want to confirm if it is OK to leave it floating without an external pull-down. Will there be any problems?
Thanks
L…
Part Number: DS90UB927Q-Q1 Other Parts Discussed in Thread: DS90UB925Q-Q1 , DS90UB926Q-Q1 , Tool/software: Dear supporter,
we have used DS90UB925Q-q1 and DS90UB926Q-q1 experience.
in new product, we need to support RGB LCD, but CPU only supply with LVDS…
Part Number: DS90UB926Q-Q1 Hello Team
1.Can serializer and deserializer spread spectrum be turned on separately?
2.Will there be any other side effects if both are turned on at the same time?
Part Number: DS90UB926Q-Q1 Other Parts Discussed in Thread: DS90UB983-Q1 Tool/software: Hi,
When using DS90UB934 to DS90UB926, the image appears as white dots circled in red as shown below.
Because the client says spread-spectrum is not used, DS90UB926…
