Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP , , USB2ANY Tool/software: Hi,
I have the latest version of ALP(v1.57) on my windows 10 laptop and did does not detect the DS90UB926QSEVB board.
I am referring to this https://www.ti.com/lit…
Part Number: DS90UB926QSEVB Hi
If we disable the spread spectrum, is there any other register setting that can improve the 27MHz/54MHz EMI from DS90UB926QS side ?
Part Number: DS90UB926QSEVB Hi
Can you share DS90UB926QSEVB and DS90UB925QSEVB layout file ?
Customer would like to copy the STP connector and trace layout. thanks!
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP Dear Sir: I want to output test pattern(RGB888 800x 800 ), Would you help to provide I2C register setting for reference. thanks!!
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP Dear Sir: 1. I can output test pattern(RGB888 60Hz) of DS926 EVB to TP6817 EVB, and TP6817 EVB bypass the RGB888 video to RGB888 panel, it works fine.(see Test 1 in the figure) …
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP Dear Sir:
I connected DS925 EVB( DS90UB925QSEVB ) to DS926 EVB ( DS90UB926 EVB ) with FPD-Link cable(as below picture)
The ALP SW for DS925 EVB information are below. DS925 EVB can r…
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP Hi TI team,
We try to set up 926EVB here, and install ALPF_setup_v_1_57_0010, and connect the USB. As shown below
The driver path of the installed hardware points to the path below C:\Program…
Hi Mickael,
Physical electrical contact is not required, you can tell by the AC caps on the FPD-Link lines. I can only confirm that the lock status will show locked when the 926's PLL is able to lock onto the FPD-Link signal and properly decode the FPD…
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: ALP Hi Team,
I try to use 925/926 EVM ( DS90UB925QSEVB/NOPB & DS90UB926QSEVB/NOPB ) But the current problem is that win10 cannot drive successfully Only show NCS USB Nano plus exclamation ma…
Part Number: DS90UB926QSEVB Other Parts Discussed in Thread: DS90UB929-Q1EVM Hello,
I want to use the DS90UB926QSEVB board to display a small video using RGB24 interface. Unfortunately, I only find a 800x480 LCD display and it doesn't work.
As this…
