Part Number: DS90UB929-Q1 Other Parts Discussed in Thread: DS90UB926Q-Q1 Hello.
I need to verify the video signal (FDP LINK III Serializer DS90UB929) generated from 6 DUTs by using just one Grabber with one FDP LINK III DS90UB926Q-Q1 Deserializer to compare…
Part Number: DS90UB929-Q1 Hi team,
We have an application using DS90UB929-Q1 + DS90UB928-Q1.
However LCD just need about 15 MHz of pixel clock.
How does DS90UB929-Q1 work below 25 MHz?
Part Number: DS90UB929-Q1 Hello,
I found UB929-D/S can support SSC profile.
Can you explain how to setting the Frequency deviation and Modulation rate?
We would like using Spread Spectrum on LVDS signal.
But we didn't see any embedded register can do that…
Part Number: DS90UB929-Q1 Hi sir,
I used 929 and 928 connections, can you give me some init register code,Or tell me the configuration process of 929. The output of HDMI I use is 1280 * 768 30fps.
tks !
Part Number: DS90UB929-Q1 Other Parts Discussed in Thread: DS90UB924-Q1 Hello,
Do we have document or can show me
How to use DS90UB929-Q1 to remote control I2C slave device(Display) throw DS90UB924-Q1?
Part Number: DS90UB929-Q1 I have successfully read the default EDID using the APB.
Can't seem to turn the process around to write my new EDID to SRAM using APB (single or auto-incremented). Always reading back the default.
I've read the following…
Part Number: DS90UB929-Q1 We have been testing with a combination of the DS90 UH 929 and the DS90 UH 926. With our last run of boards, we moved to the DS90 UB 929, so now the link is between the DS90 UB 929 and the DS90 UH 926. We appear to have issues with our…
Part Number: DS90UB929-Q1 Is there documentation of the indirect registers accessed through the ANA_IA registers (0x40 - 0x42)? I assume since the registers were added to the datasheet they were intended to be used.
Part Number: DS90UB929-Q1 Other Parts Discussed in Thread: DS90UB928Q-Q1 hello sir,
i am eric.li, Electronic Engineer of Advantech co. ltd.
can you please guide us how to enable CMM loop-through driver for DS90UB928 step by step?
we tried to set add…
Part Number: DS90UB929-Q1 Hi there,
Could you please review our DS90UB929 schematic and provide some feedback?
We will be using the part with a DS90UB928 deserializer over a shielded, twisted-pair link of around six feet in length.
I'd prefer to send…