Hi Fazil,
Are you able to modify the script to program the device for positive polarity? This would require changing 0x0f to 0x0c on line 35. In past cases, we have witnessed panels incorrectly list their sync polarity, leading to PATGEN bring-up issues…
Part Number: DS90UB948-Q1EVM Tool/software: Hi Team,
We maked a solution for 948:
We detect the register 0x1C[0] and 0x06[7], if they are found to have errors, follow below steps:
1.Pull down 947's PDB
2.Pull up 947's PDB
3.Reinit 947's regi…
Part Number: SN75LVDS83B Other Parts Discussed in Thread: DS90UB948-Q1EVM Tool/software: Hello,
I’m very interested in the solution you mentioned on the TI forum regarding the RGB/LVDS to HDMI conversion.
https://e2e.ti.com/support/interface-group…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: DS90UB947-Q1EVM , , ALP Hello, we have strange behavior between DS90UB948-Q1EVM and DS90UB947-Q1EVM. We're running pass through video and it seems that some colors are lost during translation…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: USB2ANY
As is shown in the picture above, In the C:\Program Files (x86)\Texas Instruments\Analog LaunchPADv1.57.0010\Drivers\i2c_controllers\usb2any\Firmware folder. The USB2ANY_2_7_0_0.txt…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: DS90UB948-Q1 , USB2ANY , ALP Hi Team,
When I was debugging DS90UB948-Q1, I found that there was no pop-up window when I clicked usb2any setup to select profile. Have you encountered this phenomenon…
Part Number: DS90UB948-Q1EVM Hello teams,
Thanks for your support always!
Question from customers that "How do we ensure the Ser Des EVM are workable before ship to them"?
Will we have some validation step or procedure can share with them?
…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: DS90UB947-Q1EVM Hi TI,
we configured the DS90UB948-Q1EVM GPIOs (1-4) to remote control by using the tunneled i2c bus from the serializer side. We use these GPIOs to pass through the Backlight…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: ALP Trying to get this simple set up to work, no luck yet :(
Using ALP v1.57.0010,
ds949 board is SV600978 REV B
ds948 board is SV601029 REV B
Each board by itself gets recognized by ALP, but…
Part Number: DS90UB948-Q1EVM Other Parts Discussed in Thread: ALP Hi team,
My customer bought a 949EVM and 948EVM for pre-research. And they found that ALP can detect 949 but cannot detect 948. I give the picture below. They think problem is in EVM. Can…