Part Number: DS90UB971-Q1 Tool/software: Hi Sir,
We used the following example code to enable Pattern Generator. But no any output from Dout of DS90UB971. Are there any incorrect or missing parts?
I2C between DS90UB971 and TDA4AL is ok, we can get the correct…
Part Number: DS90UB971-Q1 Tool/software: Hi,
This is Ajax from Arducam, we are applying for a PCB layout review.
As per Xhesi (x-spathari@ti.com)'s guide, I am creating this new thread and your application team will contact us with the E2E direct message…
Part Number: DS90UB971-Q1 Tool/software: Dear Sir,
We plan to replace the old UB953 with UB971, I want to know whether the csi speed of ub971 is limited at 832Mbps when it is working at fpd-link3 with dub954?
Thanks.
Part Number: DS90UB971-Q1 Tool/software: Hi,
a)How do you set I2C speed for the DS90UB971 serializer ?
b)Is there any register which can be read to confirm the I2C speed
Part Number: DS90UB971-Q1 Tool/software: Hi，
Is the spread spectrum of TI971 only applicable to synchronous mode? Which clock or signal is spread and how is it configured?
Thank you！
Part Number: DS90UB971-Q1 Tool/software:
Hi,
May I ask how to confirm the chip version information of DS90UB971 for traceability. What do PG1.0 and TC1/TC2 in REVISION-ID mean?
Thanks!
Part Number: DS90UB971-Q1 Other Parts Discussed in Thread: DS90UB960-Q1 , DS90UB953-Q1 Tool/software: How can I optimize my FPD-Link ADAS design to achieve better performance in system level ESD immunity testing? When striking my system with ESD pulses…
Part Number: DS90UB971-Q1 Tool/software: Hi，
Are the synchronous and nonsynchronous modes of TI971 written to death by hardware? Our hardware design for MODE 0 requires synchronized software configuration to light up, but when we design MODE5 on…
Part Number: DS90UB971-Q1 Tool/software: Hi,
We use the TI971 , and the sensor cannot generate images at low temperatures of -40 ℃. After analysis, it was found that the SCL and SDA at the serial and sensor ends were constantly raised, but at this time…
