Part Number: DS90UH925Q-Q1 Good day. I am posting this inquiry on behalf of our customer.
What is the offset voltage of the serializer(DS90UH925Q-Q1) output?
It was mentioned like "Offset voltage - Single ended". is the offset voltage is 2.5V or we need…
Part Number: DS90UH925Q-Q1 Other Parts Discussed in Thread: DS90UB921-Q1 Hi Experts,
Customer wants to check if DS90UH925Q-Q1 can support 1920*720/60Hz display panel(24bit RGB to to FPD-link), can you help to check this? If not, can you help to recommend…
Part Number: DS90UH925Q-Q1 Other Parts Discussed in Thread: ALP Hi
I am using Analog lauchPad which connect to DS90UH940 and DS90UH940 connect to DS90UH925.
On Analog Analog lauchPad we saw "Unknown FPD-Link III Serializer" error, error message shown as …
Part Number: DS90UH925Q-Q1 Hi Team,
Is it possible to program 0xC3 on the DS90UH925Q-Q1 to enable HDCP through the backchannel (from a DS90UH940Q-Q1)? Or can this register only be configured via local I2C?
Thanks,
Antonio
Part Number: DS90UH925Q-Q1 I have an application that requires 24 bit color. I would like to use the INTB pin as a control output on the 925 to reflect the input on the 926 INTB_IN. The datasheet shows this is a normal function, however attempts to write…
Part Number: DS90UH925Q-Q1 Hi, Team,
Please give an information,
How much delay time (Typ and Max) is happened in between PDB Low and DOUT+/- disabled?
Thanks,
Best regards,
Koh
Part Number: DS90UH925Q-Q1 Hi FPD-Link team,
I received an advice request from my customer. Now they are using(already in production) UH301 with 4.7uF capacitor for CAPL12, CAPP12 and CAPHS12 following the datasheet recommendation but, MLCC supplier Will…
Part Number: DS90UH925Q-Q1 Hi, Team,
Could you share some information that the PDB Low pulse width for Hard Reset control?
(such as T8 time specified in 954 datasheet)
and is there specified Minimum time in between VDD stable and PDB input? 0msec<= is…
Part Number: DS90UH925Q-Q1 Hi,
I would like you to confirm about below.
* Could you please tell us "min" time from "VDDIO/VDD33" to "PDB" ?
I understood that "max" time from "VDDIO/VDD33" to "PDB" according…
Part Number: DS90UH925Q-Q1 Other Parts Discussed in Thread: DS90UH926Q-Q1 Dear support team;
I read the reset value of HDCP TX IF registers(0x0F~0xF5).
And, these values were 0x00.
But, these reset values are not 0x00 in data sheet.
The fallowing value…