Other Parts Discussed in Thread: ESD341 , ESDS304 , ESDS302 , ESDS314 , ESDS312 , TSD05 , TVS0500 Hi,
I have an ethernet port and a serial RS232 interface in my design that I am trying to protect against ESD, EFT, and surge to comply with IEC 61000…
Hi Shreeneet,
You can connect the pins of both ESDS312 and ESDS314 in a way to make the device function as a bi-directional device, but you will have a reduced channel count. For ESDS312, if you connect IO1 to the line you are trying to protect and…
Part Number: TVS0500 Other Parts Discussed in Thread: ESDS312 A 1-Wire network of devices has a requirement to withstand signal to ground surges described in IEC 61000-4-5, level 2 for unshielded, unsymmetrical data lines.
The devices have a max voltage…
Part Number: TPD2E007 Other Parts Discussed in Thread: ESDS312 Hello guys,
One of my customers is using TPD2E007 for their current products to protect RS485 tranceiver device (SN65HVD485ED). But in spite of usingTPD2E007, SN65HVD485ED was broken rarely…
Other Parts Discussed in Thread: ESDS314 , ESDS312 Hi Team,
We would like to ask your help regarding the customer's inquiry below.
I need a TVS to protect HDMI signals. The surge that we are trying to suppress is similar to waveform 4 in the MIL-STD…
Hi Stefano,
I would not advise combining multiple parts for ESD protection. If you have two diodes in parallel, the voltage will only clamp to the smallest of the two. In series, the clamping voltage would actually increase.
I looked at our parts…
Hi Alex
Thanks for bringing this up. At this time we don’t have a device that provides the same function as the EClamp10012PQ which looks like a 30V Termination and ESD protection device. If there isn’t a need of the termination and just ESD with lower…
Hi Josel,
For Ethernet 10BaseT1 we have ESD devices for the secondary side as shown below:
I would recommend the ESDS302 or ESDS312 .
Regards,
Sebastian
Hello,
Our highest protection device is ESDS312 which has 25A surge current and extremely low clamping voltage. However it is 3.3V which is fin for USB D+/- just not for VBUS. Otherwise I would say TPD4E1U06 is our highest protection device for 5V but…
Part Number: TPD1E01B04-Q1 Other Parts Discussed in Thread: STRIKE , TPD1E10B06-Q1 , TPD2E2U06-Q1 , TPD1E01B04 , ESDS312 , TPD1E1B04 , ESD321 Dear team,
My customer plans to use this device, and their test requirement is as below. Their requirement…
