Schematic as below,
EVM430-CAPMINI reference schematic. I have made minor modifications including upgrade to USB-typeC and 'Y1' resonator (EVM board uses an obsolete component). Modified schematic also provided below. I don't think my modifications…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: MSP430FR2512 , Tool/software: I am trying to replicate the Captivate HID bridge (MSP430F5510IRGZT) adaptor part of the EVM430-CAPMINI touch evaluation module. It would be a great help if you…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: MSP430FR2512 , MSP430FR2422 , CAPTIVATE-FR2633
Tool/software:
I'm trying to communicate via UART to an external module. I have a EVM430-CAPMINI and I'm trying to start from EVM430-CAPMINI_Demo…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: FDC1004 , Hi Team,
can you help with the customer request:
The described application in the datasheet of the FDC1004 ( https://www.ti.com/lit/ds/symlink/fdc1004.pdf?ts=1681203754272&ref_url…
Part Number: EVM430-CAPMINI Hi
I am evaluating EVM430 CAPMINI dev board. Board standby current is 6uA. After every 1 minute, CPU wakes up and consumes 410uA, remains in that state for 10s and sleeps again for 1 minute.
I want to disable or change…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: CAPTIVATE-PGMR , , MSP-FET Tool/software: Code Composer Studio I want to know if I can develop on the EVM430-CAPMINI using the CAPTIVATE-PGMR.
The CAPMINI docs say: "To create user’s own code…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: MSP430FR2512 Does EVM430-CAPMINI support BSL using P2.5 (UCB0SDA) and P2.6 (UCB0SCL)?
In Section 6.5 of the MSP430FR2512 Datasheet, it states that P1.2 (UCB0SDA) and P1.3 (UCB0SCL) are required…
Part Number: EVM430-CAPMINI Other Parts Discussed in Thread: MSP430FR2512 , , MSP430F5510 HI.
Could EVM430-CAPMINI support bulk-I2C , if I remove LED1/LED2/LED3 and connect SCL/SDA/IRQ to related pin of U2 msp430fr2512
or I should change firmware…
Hi Rick,
Keep in mind that the CapTIvate technology measure change in capacitance, not absolute capacitance, so if you are looking to detect a change of 10pf from a base capacitance of up to 100pF then you are on the right track.
Rick Cameron said…
Part Number: EVM430-CAPMINI Hello, i purchased the evaluation board and i tried to connect with it to the "captivate Design Center" software and i got the error "No connected HID devices", I will add that the J3 jumper for RXD tTXD are on and USB jumper…
