Hello,
Basic C code examples including a few LCD examples for the MSP430FR6989 can be found at the link below. The EVM430-FR6989 also includes LCD and the source code could be referenced for LCD examples.
http://www.ti.com/lit/zip/slac668
Part Number: MSP430FR5989 Other Parts Discussed in Thread: EVM430-FR6989 , ENERGYTRACE , UNIFLASH Dear Ti team,
I'm having a problem with the sampling rate, and power consumption on ESI according to this:
I've changed the sampling rate with the…
Part Number: FLOWESI-GUI Other Parts Discussed in Thread: EVM430-FR6989 ,
Tool/software: Code Composer Studio
Hi,
I am experimenting with EVM430-FR6989 for meter reading application. I am struck at generating CCS project code and using it to calibrate…
Hello Lovelesh,
Are you using the EVM430-FR6989 kit or do you have your own custom board? If you are using the evaluation board, be sure that you have the debug circuit disconnected as this will consume current. You can disconnect by removing jumpers…
Hello Sebastian,
We don't have the CC1350 code ported to the MSP430FR6989, so if you really want this configuration, you would need to port the code.
I recommend looking into the TI Design below for using the MSP430FR6989 for inductive sensing flow…
Hi Cameron,
Attached image of the "EVM430-FR6989 Evaluation Kit"
I have tried removing jumper jumpers from J402 and J601 and some from J401. The report has been wrong.
The "EVM430-FR6989 Evaluation Kit" was connected to the PC with USB-MciroUSB…
Other Parts Discussed in Thread: EVM430-FR6989 , CC1310 , TIDA-01228 Dear Sir/madam,
I bought a EVM430-FR6989 and would like to implement the Water Meter Reference Design for three LC Sensors, Using Extended Scan Interface (ESI)
i download the package…
Hi Cameron P. LaFollette
Thanks much!
"Crashed" means the MCU is no longer working.
I used custom hardware,and I will try to slow down the sample frequency using EVM430-FR6989 Evaluation Kit
Other Parts Discussed in Thread: EVM430-FR6989 , MSP430FR6989 Hi,
Now I got EVM430-FR6989. www.ti.com/.../evm430-fr6989 It works good on preloaded program.
MSP430 peripheral which is LC sensor excitation, ESI and LCD operate correctly.
so,I tried…
Hi Eduardo,
Thanks for the clarification. Just to make sure. Are you disconnecting all jumpers from the EVM430-FR6989 except for 3V3 and GND jumper while doing the power consumption test?
Regards,
Ivan
