Part Number: HD3SS2522 Other Parts Discussed in Thread: HD3SS3220 Good afternoon.
We are using an HD3SS2522 in our design downstream of an TUSB8028B hub. The other port of the hub connects to a type-A connector and USB 3 devices mated into this connector…
Part Number: HD3SS2522 Hi Team,
Could you help to provide 5Ghz insertion loss of HD3SS2522? I can only find 4Ghz in the datasheet.
Thank you.
Regards,
Jim
Part Number: HD3SS2522 Other Parts Discussed in Thread: HD3SS3220 Hey,
I am looking for any evaluation module for HD3SS2522 IC. I am wondering why the module that existed seems obsolete and not supported. Any idea on getting a pre built evaluation kit…
Part Number: HD3SS2522
Hey,
I have a question regarding the SS_SEL line. I noticed there is a line for a pull-up resistor to 3.3V that should not be populated. Any clue what would happen if that resistor is populated? I am guessing the SS_SEL_IN will…
Part Number: HD3SS2522 Hey team,
It's stated in the datasheet that this IC supports Default USB 3.1 Current Mode. To be sure, is that mode on 900mA or 500mA? I am assuming 900mA. Thanks!
Part Number: HD3SS2522 Other Parts Discussed in Thread: TUSB542EVM , HD3SS3220 , TPS65982-EVM , TPS65982 Hi Team,
Our customer would like to evaluate the HD3SS2522 but unfortunately the HD3SS2522EVM evaluation module is already obsolete. It seems theTPS65982…
Part Number: HD3SS2522
I have seen answers that USB 3.0 supports the inverted polarity for CTX1N and CTX1P that's connected on C0P and C0N respectively. Is it okay if I switch CTX1N to be connected to C0N and CTX1P to C0P? Thanks.
Part Number: HD3SS2522 Hi Team,
We're seeing an issue with 1% of failure rate where the USB device can't be recognized when the system first startup. After we restart the system or we short RST to 3.3V, the USB device can be recognized.
We found…
