Hi Marius,
The new Demo software(Ver 2.00.00) will be released end of this week, So if you check the link http://www.ti.com/tool/hercules_safety_mcu_demos by Monday you should have the version 2.00.00 for download.
- Prathap
Dennis,
The latest version is Hercules Safety MCU Demos-v30101 and can be find at:
http://www.ti.com/tool/hercules_safety_mcu_demos
I don't think the problem is related to the version.
Once the board is plugged to the PC via the USB cable, can…
Hello Nelson:
There are some software examples included in the TMS47M demos available at the following link:
http://www.ti.com/tool/hercules_safety_mcu_demos
In addition, you can use Halcogen to generate simple drivers and startup code. The Halcogen…
Bill,
I will start with the second question.
First, are you using the latest Safety Demo Software. Hercules Safety MCU Demos-v30200.exe It can be downloaded from: http://www.ti.com/tool/hercules_safety_mcu_demos
If this is the case, can you try…
Hi Ecosat,
I run the safety demo on RevE HDK. After clicking "LED Light Show", the picture shows 6 white LEDs and 2 tri-color LEDs. If using the old rev demo GUI and demo code (for revC/D HDK) , the LED1 and LED2 will keep on whenever you check any…
Hello Roman,
1.The re flashing occurred probably because the version of the demo software in the KIT did not match with version of the demo software which is installed on the KIT.Is this behavior seen every time you connect the board and open the Demo…
Hello Joseph,
There should be no issues related to the emulators as you have speculated. The TMS570LC4357HDK has an XDS100v2 emulator built into the board so all you need to do is plug it into a USB port on your PC.
All of our publicly available…
Hi Wonjae,
I'm able to also see that the LED turned on when the debugger is connected to the target. When the LED is turned on, my ESM status registers shows that there is a CPU compare error. Please look at ESM Stat2 register to see if you are getting…
