Part Number: ISO7240CF Tool/software: Hi Team,
There is no package mechanical info for DW in the datasheet. Could you pls provide it?
Regards, Hailiang
Part Number: ISO7240CF Other Parts Discussed in Thread: BQ24600 , , ISO7041 Hi,
Good Day. I have a customer who is working with BQ24600. Please see below his query for your reference. Thank you very much.
I have a technical question regarding the drop…
Hi Ning, Thanks for your assistance.
Regarding the 200nS delay. From IC signal to gate we have the 12V to 5V resistive divider, then the ISO7240CF isolator, then the UCC27714 gate driver. Measure delay through the resistive divider and ISO7240:
Around 65nS…
Hi Aaditya Vittal,
Thank you for your answer.
I got the workaround to avoid the current issue with ISO7740F(default Low).
I have other question about ISO7240.
Aaditya Vittal said:
In order to fix this, choosing a isolator with same default state as the input…
Part Number: ISO7241M Other Parts Discussed in Thread: ISO7240CF The ISO7240 has a t-wake spec of 15us max. This spec is the timing from when the DISABLE pin is lowered, how long before the IN state is reflected on the OUT state on the isolated side of…
Other Parts Discussed in Thread: ISO7240CF-Q1 , ISO7241C-Q1 , ISO7240C , ISO7240CF Hi Expert,
According to datasheet of ISO7240CF-Q1/ISO7240C-Q1, ESD protection is defined 4kV (I believe that this spec is Vpeak.).
However, there is no description about RMS…
I would like to know what the ground current/quiescent current is for this device. The datasheet only specifies the ICCx (EN=HIGH) or Ioff (which is only the output current when EN=0V) and this does not give the ground/quiescent current of the device when…
Other Parts Discussed in Thread: ISO7240CF There is a description of “twake” in ISO7240CF datasheet p5.
Please tell me a min and max of “twake”.
Please answer it by December 4.
Hi, I am looking at the ISO7240 to use in a design. Is it possible to leave one of the voltage supply rails unpowered for any amount of time while the other is powered? This would simplify my design greatly. The datasheet says very little about this kind…
