Part Number: SN65HVD3082E Other Parts Discussed in Thread: SN65HVD3083E , ISO7631FC Dear Specialists,
My customer is considering SN65HVD3082E and ISO7631F and has a question.
I would be grateful if you could advise.
---
The R pin of the SN65HVD3083E…
Yes, you should not use ISO721 if your application requires 1200Vpk continuous operating voltage between input and output sides.
We don't have a single channel isolator with 1200Vpk working voltage but we have 2, 3, and 4 channel isolators that meet…
Hi Natallia,
ISO7231C is a failsafe high part. Its outputs go to high when the input side power is lost. This may be the reason why you are seeing the output (high?) pulse of 1 or 2 msec duration. Though I am not sure why the pulse is going low again…
Hi Gary,
Can you check if the attached document will fulfil this customer requirement for a FPPT8 Certificate for Canada?
Best regards,
Sean
FPPT8.E181974 - Nonoptical Isolating Devices Certified for Canada - Component _ UL Product iQ.pdf
Part Number: UCC23513 Hi,
What is the UL number of UCC23513DWYR? Is it number for 20190711-E181974 on the attached file?
Please help to confirm it. Thanks!
sluq004-ucc23513.pdf
Hi Brian,
Attached is a document which covers what Texas Instruments devices have UL1577 certification as of 6-18-2024. The latest document can be found on the UL website.
In this document you can see the TPSI3052-Q1 covered.
UL1577.pdf
Best Regards…
Hello Mitesh,
Thank you for reaching out to our team's E2E.
You can find the UL certificate for TPSI2072QDWQRQ1 on the UL website at the following link: FPPT2.E181974 - Nonoptical Isolating Devices - Component | UL Product iQ
For your convenience…
Hello Kazuya,
I've attached the certification documents. Additional information about the test method can be found on the UL or VDE website.
In the future, the latest revision of these document should be available under "Technical Documentation" on…
Part Number: DAC8760
Hello All, I have checked the datasheet for this IC but not able to find the Chip Select pin for it. I want to use this 4 IC on same SPI bus so what i need to do if it's default selected by default within the IC ?
Is it LATCH…
