Part Number: ISO7640FM Hello,
The ISO7640FM datasheet specifies maximum channel-to-channel skew and part-to-part skew.
Under which conditions will the part be at such maximum skews?
Can we assume these values lower under controlled temperature environments…
Part Number: ISO7640FM hi
I would like to implement isolated I2S communication with master clock from oscillator and I want to ask you for some advices about it.
I found ISO7640 which is 150Mbps, but I am not sure whether 98,304MHz master clock on…
Other Parts Discussed in Thread: ISO7641FM Hi all
I noted that the high level input current had to be less than 10uA while the digital input signals into ISO7640FW were at least 3mA. What should I do to fulfill this isolation function?
Thanks
Other Parts Discussed in Thread: ISO7640FM Dear Sir
ISO7640FM datasheet P.6 Recommended Operating Conditions table shows signaling rate as below.
The spec MIN is 0MBps and MAX is 150Mbps , does it means ISO7640FM support DC to 150Mbps operation…
Are tsk(o) and tsk(pp) spec condition of 25℃?
Or is it spec condition of -40℃～125℃?
When having spec information on skew time by the temperature range, please let me know.
Especially, I'd like to know a spec of -20℃～60℃.
Best regards,
Sat…
Other Parts Discussed in Thread: ISO7640FM Hello, we are developing a product that needs to touch 480VAC lines. The ISO7640FM was found with very high isolation ratings but noticed that the working voltage per datasheet Description is 400 volts RMS. Note;…
Customer will use two ISO7640FMs.
If two ISO7640FMs mount on the back and front of a substrate, is it "no problem" ?
(On both sides of a substrate)
Does it have influence of a magnetic field and an electric field?
Best regards,
Satoshi
Other Parts Discussed in Thread: UCC27531 Hi guys,
the question is very simple, I`ve read the datasheet but my logic of this phrase "Each isolation channel has a logic input and output Logic Levels buffer separated by a silicon dioxide (SiO2) insulation…
Other Parts Discussed in Thread: ISO7640FM Calculation (by datasheet) and survey data are not matched about the ISO7640FM's supply current.
Are the following calculation methods mistaken?
----------------------------------------------------
［Condition…
