Part Number: ISO7730 Hello,
My customer is considering to replace a 4ch(4:0) digital isolator to ISO7730. They actually use only 3ch although they are using 4ch version. Now pin 6 is directly connected to GND because they don’t use this channel and they…
Part Number: ISO7730-Q1 Other Parts Discussed in Thread: ISO7730 Tool/software: WEBENCH® Design Tools Hi,
Can i find the spice model of this IC.
I need to simulate my circuit with this model.
.ibs model is available for this model.
Part Number: ISO7730-Q1 Dear team,
I think the title gives already some hint what the question is about:
The customer intends to use the ISO7730-Q1 in the DW package option, however it is not clear what the working voltage is:
The data sheet states in…
Hi Phil,
I hope we have answered your questions and hope that you are able to use ISO7730 without any issues in your application. I will go ahead and mark this thread as closed but if you do have a question related to this discussion, please do not hesitate…
Part Number: ISO7730 Hi team.
My customer wants to use this Isolator. they wants to need more creepage is over 9mm in 450Vrms. However it clear the voltage of 450Vrms, but the creepage is short of 9mm in recommend layout.
Would you tell me the advice if…
Hi Chase,
Thank you for inputs.
That's right, ISOW7721 has only 2-channels and I shared this device because this is only device from our product group that supports load sharing feature. If load sharing is a requirement that you must need then I recommend…
Part Number: ISO7730 Dear Team,
There is a question regarding ISO7730F EN VIH voltage level. In the datasheet VIH min is 0.7xVCCI.
May I know if VCCI is VCC2?
So if VCC2 is 5V, EN VIH min is 3.5V and we cannot use 3.3V MCU to control the En pin directly…
Part Number: ISO7330C Other Parts Discussed in Thread: ISO7340C , , ISO7730 Dear Specialists,
My customer is considering ISO7330 instead of ISO7340.
They have a question about NC pin connection, so I would be grateful if you could advise.
---
Due to the…
Part Number: TPS2373 Other Parts Discussed in Thread: ISO7730 Dear team,
Because my customer have to use the TPL/TPH/BT 3 pins indicator which are isolate signals. I saw datasheet suggest to use Opto-isolators, may I know could we use TI Isolation solution…