Search tips
Showing 78 results View by: Thread Post Sort by

  • J7200XSOMXEVM: J7200XSOMXEVM

    TI Thinks Resolved
    Part Number: J7200XSOMXEVM Is it possible to add a fast storage such as SSD drive using the PCIe interface on the J200 evm board? If so what would be the expected through put.
    • Answered

  • J7200XSOMXEVM: J7200XSOMXEVM

    Resolved
    Part Number: J7200XSOMXEVM Other Parts Discussed in Thread: DRA821 I am trying to build a recipe in the TI-SDK 08_04_00_06, what I am trying to build is sysbench application. I downloaded and install the gcc-arm-9.2-2019.12-x86_64-aarch64-none-linux-gnu…
    • Resolved

  • J7200XSOMXEVM: J7200XSOMXEVM

    Part Number: J7200XSOMXEVM I am running linux based on SDkK 08_04_00_06 on one of my systems eth0 is unable to run at 1000Mb/s but works fine at 100Mb/s. Is there a patch for that? Thanks
    • Answered

  • J7200XSOMXEVM: How to change the console for keywriter

    Resolved
    Part Number: J7200XSOMXEVM The default console used by the TI keywriter is MCU_UART. In case that MCU_UART is not brought out on the custom boards how can we switch the keywriter console to other UART instances for example MAIN_UART0
    • Resolved

  • RE: J7200XSOMXEVM: Network is not working

    For board related adaptation changes, we expect the same are applicable with SDK 8.2 vs 7.2.

  • RE: J7200XSOMXEVM: Switch functionality

    Hi Cheery, Sorry for delayed reponse. Starring from SDK 8.1 Ethernet Firmware enabled MAC-only more for selected ports (by default Port-1 and Port-4. Port-1 mapped to A72 client and Port-4 mapped to MCU2_1 RTOS client). You can disable MAC only ports configuration…
    • Answered

  • [FAQ] J7200XSOMXEVM: How do I enable CAN with Linux driver on J7200?

    Resolved
    Part Number: J7200XSOMXEVM By default, CAN is not enabled on Linux for J7200. How can I enable CAN on PSDK Linux 8.5?
    • Resolved

  • RE: J7200XSOMXEVM: Ping delay too high during temperature crossover test

    Hi Cherry, Sorry for the delayed response. Is this issue still open? Regards, Tanmay
    • Answered

  • RE: J7200XSOMXEVM: CAN12 is blocked

    Resolved
    Hi Karan, Thanks for your great support. I haven't got the reply from customer. Thanks. Regards Shine

  • RE: DRA821U: xSPI boot mode setting for J7200XSOMXEVM

    Hi, Masaki Soga said: JESD251 and JESD216D, refer to Section 4.3.8. Yes, the boot mode configurations mentioned in the section supports only specific protocols. Regards, Parth

Didn't find what you are looking for? Post a new question.