Part Number: J7200XSOMXEVM Hi all,
We've configured the evm board to use the SD card as the primary boot and eMMC as the secondary boot. This works pretty much as expected, but if there is no SD card inserted or a blank SD card is inserted the ROM seems…
Part Number: J7200XSOMXEVM Other Parts Discussed in Thread: DRA821 Hi,
The boot configuration for j7200SOM(DRA821) supports BOOTP and/or TFTP, but I could not find information how to set EVM switches (SW8&SW9) to configure it, how this would be possible…
Oh ok.. Then could you help me understand what do you mean by the below
yang yang said: now we need to write our own application on mcu1_0,
In the current SDK, the application is run on the A72 and there are nodes running on MCU2_0, C66, C7x as targets. …
Hi Diwakar,
Yes , suggested patch worked perfectly to enable the type-A USB . Now both type-C and type-A USB interfaces are working as expected.
Appreciate you great support. Thanks you.!
Regards
Praveen
Part Number: J7200XSOMXEVM
Is it possible to add a fast storage such as SSD drive using the PCIe interface on the J200 evm board? If so what would be the expected through put.
Part Number: J7200XSOMXEVM Other Parts Discussed in Thread: DRA821
I am trying to build a recipe in the TI-SDK 08_04_00_06, what I am trying to build is sysbench application. I downloaded and install the gcc-arm-9.2-2019.12-x86_64-aarch64-none-linux…
Part Number: J7200XSOMXEVM
I am running linux based on SDkK 08_04_00_06 on one of my systems eth0 is unable to run at 1000Mb/s but works fine at 100Mb/s. Is there a patch for that?
Thanks
Part Number: J7200XSOMXEVM
The default console used by the TI keywriter is MCU_UART. In case that MCU_UART is not brought out on the custom boards how can we switch the keywriter console to other UART instances for example MAIN_UART0
Hi Cheery, Sorry for delayed reponse.
Starring from SDK 8.1 Ethernet Firmware enabled MAC-only more for selected ports (by default Port-1 and Port-4. Port-1 mapped to A72 client and Port-4 mapped to MCU2_1 RTOS client). You can disable MAC only ports configuration…