Part Number: J721EXCPXEVM Other Parts Discussed in Thread: TCA6424A Hi,
I would like to check if the boot-mode switches(mcu and sys) could be overridden by using the Test Automation Header?
As per the EVM Common Board Schematics, Section 55, it says bootmode…
Hi Neehar,
Yes I am using J721S2 EVM.
Neehar Sawant said: For examples of toggling the LEDs, you can refer to older SDKs such as 8.6.
Where can I find the older SDK releases?
Neehar Sawant said: Do you solely wish to control the USER LEDs on the GPIO Expander…
Part Number: J7200XSOMXEVM Other Parts Discussed in Thread: J721S2XSOMXEVM Hi J7200 Champ,
we are using J721S2XSOMXEVM & J7200 SOM.
Could you please support USB Port enabling on top of PSDK 9.1 or 9.2 ?
we want enable Two USB 2.0 Port.
Best regards…
Part Number: J721S2XSOMXEVM Hi TI experts,
HW: our custom board
SDK: j721s2, 8.6
How do I enable main domain watchdog in SBL boot flow?
Is there a patch for this?
Thanks
Regards
quanfeng
Part Number: J721S2XSOMXEVM
Hi,
I have been trying to use NVMe SSD storage device on J721S2XSOMXEVM board. The SSD was not able to detect due to no PCIe host bridge enabled with prebuilt image in ti-processor-sdk-rtos-j721s2-evm-09_01_00_06-prebuilt…
Part Number: J721S2XSOMXEVM Dear Experts,
Compared with the EVM, my custom board uses a piece of DDR(same part) and nothing else. But the SBL startup is stuck at "Initlialzing DDR ...".
My questions is:
1. In this case, what needs to be done…
Part Number: J721S2XSOMXEVM i did J721s2 eMMC booting.
When I checked the boot log, I saw unnecessary tasks such as accessing the SD card or not understanding it.
How do I get it to boot directly to eMMC without mounting it to an SD card?
1. i add code…
Part Number: J721S2XSOMXEVM HI
when c7 dsp funcA use Streaming Engine, then a interrupt coming, interrupt func also use Streaming Engine, when interrupt return, funcA will error ?
Part Number: J721S2XSOMXEVM Other Parts Discussed in Thread: TDA4VL
Hi Expert,
SDK version: 9.0.1
CORE: mcu1_0
After running the example code of PWM app on SDK TDA4VL , J721S2 the PWM waveform is not observed on TP82 which is located on SOM.
Code…