Search tips
Showing 399 results View by: Thread Post Sort by

  • J722SXH01EVM: How to setup the CCS debug log uart mode on J722S DSP side

    Part Number: J722SXH01EVM I set the ccs debug log urat mode like this: If I set the uart instance =USART0 or USART1, the system is crash when the code run in DebugP_log. When I set the other urat instance, the system is fine but no display on…

  • J722SXH01EVM: After completing the Pbist and Lbist processes, the XDS simulator was unable to connect to the chip.

    Part Number: J722SXH01EVM Hello,After we performed Pbist and Lbist on the SOC J722S, it resulted in the XDS simulator being unable to connect to the chip. Detailed information is as follows: 1.We found that in the PBIST_INSTANCE_MAIN use case, four…

  • J722SXH01EVM: TI EVM Boot Process Failure with ADAS SDK Image

    Part Number: J722SXH01EVM Hi, I am trying to boot a J722S EVM using the ADAS SDK, but the board does not boot from the SD card. First, I created the SD card using the SDK installer: ti-processor-sdk-linux-adas-j722s-evm-11_01_00_03-Linux-x86-Install.bin…
    • Answered

  • J722SXH01EVM: DDR timing parameters for 4000 MT/s used in 11.0.x SDK for J722S.

    Resolved
    Part Number: J722SXH01EVM Other Parts Discussed in Thread: SYSCONFIG Hi Team, I am using the J722S EVM, which has an MT53E2G32D4DE-046 DDR device. According to the DDR datasheet, the maximum supported DDR transfer rate is 4266 MT/s. However, the J722S…
    • Resolved

  • J722SXH01EVM: EdgeAI gui built with Yocto on J722S EVKIT not working

    Part Number: J722SXH01EVM Hi I have a j722s evkit (tda4aen) development board. When booting to edgeai image of J722S-evm machine via Yocto, gui app doesn't work well.
    • Answered

  • J722SXH01EVM: No login prompt

    Resolved
    Part Number: J722SXH01EVM Tool/software: /mnt/boot ├── Image ├── k3-j722s-evm.dtb ├── ti │ ├── k3-j722s-edgeai-apps-j722s-evm.dtbo │ └── k3-j722s-vision-apps.dtbo ├── tiboot3.bin ├── tispl.bin ├── u-boot.img └── uEnv.txt uEnv.txt: # Update the Linux…
    • Resolved

  • J722SXH01EVM: J722s: how to reset mcu20 when system is running?

    Part Number: J722SXH01EVM Hi Ti expert, i used J722S MCU+ SDK 11.00.00. after soc boot and start all cores, if a core, for example, mcu20 run abnromal, maybe in a dead loop or hardfault, is there a method to reboot mcu20 core ? it can be reset by…

  • J722SXH01EVM: j722s: how to get task info in mcu20?

    Part Number: J722SXH01EVM Hi Ti expert, 1. i used j722s sdk v11, and i want to monitor if tasks i created running normally in mcu20. 2. i see in mcu 20, freertos native api is not used, and wrapped by taskp api by ti. my question: 1. how can i…
    • Answered

  • J722SXH01EVM: On board emulator is not identified

    Resolved
    Part Number: J722SXH01EVM Other Parts Discussed in Thread: AM67 #1. The on board XDS100 emualtor is not detected. #2. The uart on xds110 USB connector can be recognized and output automate test information. #3. Can connect with a external…
    • Resolved

  • J722SXH01EVM: Booting SBL from OSPI_NAND isolating OSPI_NOR, how to load SBL from OSPI_NAND?

    TI Thinks Resolved
    Part Number: J722SXH01EVM Hi, Team how I can boot the board completely from OSPI_NAND by SBL booting process. From my understanding of the TRM and reference schematics: Both OSPI NOR and OSPI NAND use the same BOOTMODE value (OSPI boot)The distinction…

Didn't find what you are looking for? Post a new question.