Hello Bryan,
The standard RFSDK solution is to use Linux, and the RFSDK, which requires DDR3. There are two third party customization companies for the RFSDK, Azcom in Italy, and Commagility in England.
There are two sections in your email about control…
Hey Marvin,
See attached. Note this is designed to be used with the new unreleased JESD Controller software that pairs with the TSW14J58 capture card. When the top level script mentions the clocks being setup you should go to your FPGA ILA and try…
Part Number: DAC38J84EVM Other Parts Discussed in Thread: LMK04828 I would like to output waveform with FCLK=2.5 GHz and x4 interpolation from IOUTAP of DAC38J84EVM. However, with the following setting, I did not see any output from IOUTAP. Only one LMF…
Part Number: DAC38J84EVM Other Parts Discussed in Thread: DAC38J84 , ADS54J69EVM
Dear TI Supporters,
I am testing with DAC38J84EVM + TSW14J10 + ZCU106(Xilinx Ev board with ZCU7EV).
I have modified "TI_HSDC_Pro_Reference_design_V2.8" as attached…
Hello Ameet Bagwe,
The changes made when setting from 500M to 1G are as follows.
And the transceiver settings in 1G are as shown below.
First, I set the 984 registers below extracted from the GUI, including the delay time.
SIM_DUAL_ADC.write…
Part Number: AFE7903 Other Parts Discussed in Thread: LMX2820 , , LMK5B33216 Part/configuration
AFE7903 (chip version 0x12), external 6 GHz device clock (source from LMX2820, on-chip PLL bypassed).
TI LATTE originally generated the configuration…
Part Number: DAC39RF10EVM Other Parts Discussed in Thread: DAC39RF10 Hi team,
When performing playback tests using the DAC39RF10 evaluation board paired with the TSW14J59, we control the setup via the accompanying GUI. The JESD link keeps failing. Please…
Dear Samba Sir,
Thank you for the answers, this really helped clarify things. I also checked separately and confirmed that I do need the Xilinx UltraScale+ Transceiver Wizard along with the TI IP to instantiate the transceivers (GTY).
I want to mention…
Hey Venu,
Did you set the DAC source correctly? Both on the "analog output" tab as well as the "nco configuration tab" there is the DAC source mux control. Make sure the stream is arriving to the DAC you are hooking up to view.
In addition, does the…
Part Number: DAC39RF12EVM Other Parts Discussed in Thread: DAC38J84 , DAC39RF12 Hello,
We have a development platform consisting of an Avnet-Tria UltraZed-7EV and DAC39RF12-EVM boards.
TL;DR I am able to get the link to started: I see the DAC de-assert…
