Search tips
Showing 232 results View by: Thread Post Sort by

  • LAUNCHXL-F28P65X: undocumented MCAN Clock Requirements?

    TI Thinks Resolved
    Part Number: LAUNCHXL-F28P65X Other Parts Discussed in Thread: TMS320F28388D Tool/software: Hello, I'm working on adding CAN FD support to our bootloader. The customers of the bootloader will be able to pick a baud rate and data rate and the build system…

  • RE: LAUNCHXL-F28P65X: Application Not Running After DCAN Flashing on F28P65x Using dcan_flash_programmer.exe with CAN Tool: PEAK CAN

    Hello, suresh k said: S3: GPIO72 = 1 (UP) GPIO84 = 1 (DOWN) Is GPIO84 1 or 0? This is unclear. CAN boot is 72=1, 84=0. suresh k said: Set the BOOTDEF value in OTP manually? Yes, you will have to program the correct BOOTDEF value using the Flash…

  • RE: TLIN2029EVM: TLIN2029EVM interfacing with LaunchXL-F28P65X

    Hi Delaney, Wanted your opinion on the LIN example no. 7 with the LaunchXL-F28P65x development board with TLIN2029 evaluation board. If possible can you try with the same hardware which i was working and having issues on implementation LIN. That…

  • LAUNCHXL-F28P65X: Error while generate simulation file for CLB

    Part Number: LAUNCHXL-F28P65X Other Parts Discussed in Thread: C2000WARE Tool/software: I’m getting familiar with the CLB Tool for the C2000 device (using LAUNCHXL-F28P65X). I followed the CLB Tool User’s Guide (spruir8b) and encountered the following…
    • Answered

  • LAUNCHXL-F28P65X: C2000 Code Coverage HTML Visualization Report

    Resolved
    Part Number: LAUNCHXL-F28P65X Tool/software: Hi, I was able to follow the app note Code Coverage with TI Compilers app note and it generated the *.csv files just fine for me on my C2000 F28P65x project. But the *.csv files are hard to read and not very…
    • Resolved

  • LAUNCHXL-F28P65X: DAB topology PWM waveform defects and ask for some solutions.

    Part Number: LAUNCHXL-F28P65X Tool/software: GaN_SigleStagePrj_V.003 1.zip
    • Answered

  • LAUNCHXL-F28P65X: How to synchronize the EPWM Type-5

    Resolved
    Part Number: LAUNCHXL-F28P65X Other Parts Discussed in Thread: SYSCONFIG Tool/software: hello I'm trying to use EPWM-TYPE5(XCMP) for complex PWM pulse control, but I'm having trouble with synchronization. Unlike TYPE4, it seems that sync-in isn…
    • Resolved
    • Answered

  • LAUNCHXL-F28P65X: No UART output on /dev/ttyACM1 with SCIA example

    Resolved
    Part Number: LAUNCHXL-F28P65X Other Parts Discussed in Thread: TMS320F28P650DK Tool/software: Hello, I am using the F28P65x LaunchPad (TMS320F28P650DK) with CCS 10.2 on Linux. I am trying to get UART logs over the XDS110 virtual COM port. - Built with…
    • Resolved

  • LAUNCHXL-F28P65X: CAN Communication Issue Between two F28P65X Launch Pads

    Part Number: LAUNCHXL-F28P65X Tool/software: Hi , I was tring to communicate between two f28p65x launch pad.I took the can_ex5_transmit_receive example and then flashed rx in one board and tx in another board in debug mode when i tried to send data…
    • Answered

  • LAUNCHXL-F28P65X: Active low complementary with larger off time.

    Resolved
    Part Number: LAUNCHXL-F28P65X Tool/software: Hi, I want to create a pulse where ePWMxA should be active high and ePWMxB should be active low and with a 50% duty cycle. I want to have a dead band, which makes the off time more and on time less. Like…
    • Resolved

Didn't find what you are looking for? Post a new question.