The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: LDC1041 Other Parts Discussed in Thread: LDC1000EVM , LDC1101 , LDC3114 Hello, My customer plans to use LDC1041 for their new design. They designed an L using WeBench, it is supposed to around 1.2uH. The L is on their target PCB with a C,…
Part Number: LDC1041 Other Parts Discussed in Thread: LDC0851 , LDC1000EVM Hi,
we currently design & manufacture metal defect sensors that detect cracks in metal sheets anywhere from 0.1mm deep to 1mm or more.
At the moment we have a 2-coil (bridge…
The configuration is older and maybe i change it , it’s okay.
emmm.i have no time debug this anymore, i will try turn to ldc1051 or ldc1041, the lower f maybe fix my problem.
my sensor work in -40℃~+85℃，so Temperature compensation strategies? can…
Dave,
Thanks for your patience. After checking with the team, it seems we did not anticipate the device being used the way you propose and don't have any alternatives to provide.
If this is interface capability is a must-have, we have other inductive…
Hi Justin
Thanks for the clarifications.
Justin Beigel said: You could try a driver update to see if it helps with the GUI testing, but it wouldn't help with the code composer issue.
I tried it a few times before but it didn't help with the GUI testing…
Part Number: LDC1000EVM Hi, Our customers refer to the following application notes. And they are evaluating. LDC1000 LDC1001 LDC1041 LDC1051Evaluation module.pdf LDC1000LDC1041LDC1051 Evaluation Module snau150a.pdf LDC1000EVM Quick Start Guide.pdf Then, could…
Part Number: LDC1041EVM Tool/software: Code Composer Studio Hi,
My issue with the MSP432 and the LDC1041 wasn't resolved. Do you have a sample of code that could help me manage to use the LDC1041? I didn't change anything on the sensor : I kept the coil…
Part Number: LDC1101EVM Other Parts Discussed in Thread: LDC1101 , LDC1041 , OPT3101 Hello
In a factory automation application we are trying to measure a varying distance between a moving object and a fixed heavy metal (steel) plate. We must attach the sensor…
Chris, I will try but I'm pretty sure it won't work because I don't read anything on the first register 0x22... I'm using two power sources : one is the MSP432 itself, which powers the LDC1041 I/O with 3V3 and I use another MSPS432 with…
Hi Patrick,
The probe connected in my setup is a TDP1500 - it has 200K differential input resistance, is that fine? https://www.tek.com/en/datasheet/differential-probes
sensor min freq 8/3 = 2.67MHz seems a better fit for our device which operates at…
