List of every TI regulator in the TO-3 package that can deliver at least 3A:
Part Number
Description
Minimum Vin-Vout
LM138LM138 5-Amp Adjustable Regulator
3.0 V
LM338
LM338 5-Amp Adjustable…
" ... with the old device this circuits worked correctly ..."
Old device? LM338 has not changed in 30 years, other than TI now owns the device.
If possible please provide your schematic. The LM338 is relatively simple device.
The link provided points…
Hi Jason,
Perhaps I should have added some assurance that the device was applied within operating limits, Vin = 11 V and Iout is approximately 25 mA.
The core of the question has to do with the manner in which the device is specified, primarily with…
Hi Tariq,
We have many ADCs that operate over 10 Msps. However I do not know of any that would help you with an SD card implementation. I think that is more of an OMAP implementation question.
The OMAP LM138 has a UPP interface that may be compatible…
Yu,
Using the uPP (universal parallel port) of the LM138 it may be possible to connect the CMOS output ADC to the LM138. We have not done this on any EVMs but it may be possible. There is a document on the ti.com site that covers the details of the…
Hi Koji Hamamoto,
The P+ product enhancement program originally involved testing to screen out assembly and silicon defects that could cause safe operating area and other failures under high stress conditions. The improvement in manufacturing quality…
Hi,
I would like to input / output multiple serial data lines to the LDCK board. either I2S or TDM.
Which pins on the J14 or J15 connector are capable of this?
or in other words, which pins can I use on either J14 or J15 connector for audio peripherals…
