• LM350-N-MIL: Document Errors

  

  Daniel Vasher

  TI Thinks Resolved

  Part Number: LM350-N-MIL Other Parts Discussed in Thread: LM350-N , , LM350A Hello team. The TI product page says for the LM350-N-MIL device the data sheet applies to both LM350-N and LM350-N-MIL. In the data sheet Absolute Maximum Ratings it’s not…

  • over 7 years ago
  • Power management
  • Power management forum

• LM2907-N: Does TI has Automotive grade or Aerospace MIL grade part for Frequency-to-voltage converter?

  

  Sivakumar Shanmugam

  TI Thinks Resolved

  Part Number: LM2907-N Other Parts Discussed in Thread: TPS3704 I am planning to make frequency-to-voltage converter to be used at DC bus to sense the frequency noise available on the DC line in the event of short circuit using F/V converter IC like LM2907…

  • 1 month ago
  • Amplifiers
  • Amplifiers forum
Answered

• LM350-N: LDO with large output current

  

  Chase Jeong

  Resolved

  Part Number: LM350-N Other Parts Discussed in Thread: LM350A , LM1085 Hello TI experts, My customer considers LM350 for their new product, instead of DCDC buck converter. The application is medical equipment, so they are very sensitive to switching…

  • Resolved

  • over 4 years ago
  • Power management
  • Power management forum
Answered

• LM337-N-MIL: LM337H/NOPB; metal lid body inductive or conductive?

  

  Amira Roslan

  Resolved

  Is the metal body of the voltage regulator LM337H/NOPB may cause the short circuit if it touches with other components/metal components? Because, from our understanding, the body of the component should be inductive, and not conductive. Can you please…

  • Resolved

  • over 2 years ago
  • Power management
  • Power management forum
Answered

• LM337-N-MIL: LM337H/NOPB; suspected failure due to touching the lid body

  

  Amira Roslan

  Resolved

  Part Number: LM337-N-MIL In our Amplifier application, the Voltage regulator of LM337H/NOPB is touching the metal lid of the body casing, it then causes the failure: short circuit between this voltage regulator LM337H/NOPB and the lid body casing. It…

  • Resolved

  • over 2 years ago
  • Power management
  • Power management forum

• LM350-N: Spice Model needed

  

  Oz Kocoglu

  Part Number: LM350-N Hi there, I am looking for a Spice Model for the LM350-N. Can you please provide that ? Thank you and best regards, Oguz

  • over 5 years ago
  • Power management
  • Power management forum

• LM317-N-MIL: Multiple LDO devices, Max/Min input voltage request

  

  ArTzy

  TI Thinks Resolved

  Part Number: LM317-N-MIL Hi Experts, Good day. I am reaching out to guide us completing the information requested by a known Cx: OPN MIN INPUT MAX INPUT LM317K STEEL/NOPB ? ? LM350K STEEL/NOPB ? ? LM317HVK STEEL…

  • over 4 years ago
  • Power management
  • Power management forum

• LM350-N: Negative Use

  

  Anonymous

  TI Thinks Resolved

  Part Number: LM350-N Other Parts Discussed in Thread: LM317 , TPS7A33 In the uA7805 datasheet it says that with a floating negative voltage you can use the 7805 as a negative regulator by connecting its output to ground and using the ground side of the…

  • over 8 years ago
  • Power management
  • Power management forum

• RE: TUSB1104: SLS Debug

  

  Vishesh Pithadiya

  Hi, 1 lane1 From what I see the trace lengths are as follows: PIN_T31 -> ss_rx_serial_i (3306 mil) PIN_T30 -> ss_rx_serial_i(n)" (3306 mil) PIN_N37 -> ss_tx_serial_o (3050 mil) PIN_N36 -> ss_tx_serial_o(n) (3050 mil) 2 lane2 FPGA PIN PIN_R33…

  • 6 months ago
  • Interface
  • Interface forum

• RE: SN65DP159: data regarding the prudact

  

  David (ASIC) Liu

  Hi, Please see below for the details, Die Size: 74.8 X 74.8 MILS Die Thickness: 10.5 MILS Mold Compound P/N: SUMITOMO EME-G700LTD For additional detail, please refer to IPC-9701, JEDEC JESD22-A104D as these are the spec TI follows. Thanks…

  • 1 month ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.