Hi
We do not have something P2P with LM3880 offering push pull output.
For the LM3880, the minimum is 1.0V and the max is VCC + 0.3
For the UCD9090-Q1, EN is a CMOS signal, the minimum is VCC - 0.6V, the max is 3.6V
For 1us glitch, it will be…
Hello Tsukui-san,
With FPGA's their actual power needs vary depending on the clock speed and other variables.
Therefore many times TI does not have a design for a specific FPGA.
One good way to build a design is to use Webench FPGA Architect.
…
Ryuji,
1) The LM75610 is compatible with ISO7637-2, 2011.
2) Pulses 4, 5a, 5b have been moved out of ISO7637-2 (2004) and are now in ISO 16750-2 and ISO21848 per the note on pg 16 of ISO7637-2 (2011). I looked over several TIDA ref designs and could…
Part Number: LM3880
Hi,
I'm a user of LM3880MF-1AA.
I have two questions about "7.3.2 Incomplete Sequence Operation" in the datasheet.
Q1.
In Figure 7-3. Incomplete Power-Up Sequence,
what are the maximum…
Other Parts Discussed in Thread: TPS61175 , TPS1H100-Q1 , LM3880 Hi,
I am working on a circuit that has a +24 V switchable output (max. 1 A). The input voltage of +12 V is first boosted to 24 V using the TPS61175. Because I do not want +12 V at the…
Part Number: AM62A7 Tool/software: Hello TI team,
We met issue about MIPI CSI Virtual Chancel preview on TI platform.
Our environment is as following:
TI SDK BSP version: V09_00_02
Linux version: 6.1.80
Device tree overlay setting…
Hi Divya,
The only suggestion I can find is that several of the logic lines in our evaluation board have a series 50ohm resistor.
For example pins: ADC10D1X00RB.pdf
U3 PDI
V3 PDQ
Y3 FSR
W4 DDRPHASE
B3 ECE
V4 CALDLY
V5 DES
This is to…
Feiran,
looking at the ADC07D1520 EVM schematic, I noticed the FMC pins have connection made on rows besides H, G, D, and C. Therefore, this is HPC connection
reference:
ADC0xD1520RB_R1_Schematic_07-27-2K12.pdf
-Kang
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
