Part Number: LMC567 Other Parts Discussed in Thread: LM567C Tool/software: Hi
Let me confrim about some points as below.
1) There describes the value "2Vpp min" on the datasheet page4, "7.1 Absolute Maximum Ratings".
I suppose this seems to be typo…
Part Number: LMC567 In the data sheet for the LMC567 the PCB layout example (section 12) shows a ground plane on the top layer. In our design we have a full ground plane on the layer directly underneath the top layer. Do we still need a ground plane area…
Part Number: LMC567 Hi I have been reading the data sheet, and to me, it is written incorrectly. Can you put me right?
10.2.2.1 Timing Components As VCO frequency (FOSC) runs at twice the frequency of the input tone, the desired input detection frequency…
Part Number: LMC567 Hello team,
I received a question from the customer.
I think pin 5 and pin 6 are reversed in the pin config and figure 8, which is correct?
I think it is correct to connect the timing capacitor to pin 5, right?
Regards…
Part Number: LMC567 Hello guys,
One of my customers is considering using LMC567 for their next products.
They are trying to determine external compornents parameters of LMC567
(Compornents are C1, C2, Ct, Rt and RL in Figure8 of the device datasheet…
Part Number: LMC567 Other Parts Discussed in Thread: LMC555 Dear Forum Member,
I am interested in the (analog) phase locked loops (Signetics older NE56x series and their descants).
I would like to know whether CMOS 567 internally use a classic Gilbert…
Part Number: LMC567 Hi Team,
Good day,
Just want to confirm, does Finput=2Fosc correct?
When equating Rt in equation 8&9,page 11. The equation that will give 2input=Fosc.
Thank you and looking forward for your kind response.
Regards,
Mayn…
Part Number: LMC567 I have an audio signal that is generated in software (written to an audio file) and contains binary FSK encoded data and need to decode it back to digital data.
The datasheet for the LMC567 says that this supports wide band fsk demod…
