Part Number: LMH0030 Other Parts Discussed in Thread: CLC020 , CLC021 , LMH0340 , LMH0341 , LMH0302 , LMH0384 Hi team,
Background:
The customer has a thermal imaging machine with BT.656 interface output and wants to convert it into an SDI interface. BT.656…
Part Number: LMH0030 Other Parts Discussed in Thread: LMH0340 Dear all
I scan the LMH0030 datasheet,it can only support ITU-R BT.601, I want to know is there any device that can support BT.1120 interface ? Which device output can support 1080p/60hz ? …
Part Number: LMH0030 I need to insert data into the VANC space of an HD-SDI stream of varying video formats, and it is required to be in the "Y" channel.
I was investigating the LMH0030 to do this with, however it does not seem capable of inserting…
Other Parts Discussed in Thread: LMH0030 Hello,
We will be using the LMH0030 to embed ancillary data in HD TPG mode (no input video signals). VCLK will be generated by a voltage controlled crystal oscillator (VCXO) at 74.25 MHz.. Five volts is supplied…
Other Parts Discussed in Thread: LMH0030 We would like to send just ancillary data on our SDI up-link, and, given that the LMH0030 is so sensitive to jitter on VCLK, we would like to use a 74.25MHz oscillator and use the internal TPG to create the video…
Other Parts Discussed in Thread: LMH0030 , LMH0040 , LMH0340 I am writing some FPGA code to convert parallel data + FV & LV signals into SMPTE format (720p) for input in to the LMH0030 serialiser. The output of the serialiser goes to a SDI-to-HDMI converter…
Other Parts Discussed in Thread: LMH0030 Dear Sir,
We currently use a LMH0030, with ANC path in order to insert Audio Data Packet in HD standard.
Page 13/37 of the datasheet , it seems that LMH0030 is not able to insert ANC into Y channel, only into chrominance…
Other Parts Discussed in Thread: LMH0030 , LMH0002 , LMH0031 We have a requirement to pass the LMH0030 output signal from the middle of a long, thin board to the buffer chip (LMH0002) at the end. Space constraints require this signal to be routed on an inner…
Other Parts Discussed in Thread: LMH0030 Hello,
I've got trouble using the LMH0030 for the generation of a PAL (BT601) test pattern.
Configuration of component is OK.
If I configure Test0 register so as to output a NTSC pattern, bit 7 of Test0 (PASS…
Other Parts Discussed in Thread: LMH0030 , LMH0040 Hello~
The following statement is extracted from the LMH0030 datasheet .
APPLICATION INFORMATION Complete details for the SD130ASM evaluation PCB are available on TI’s WEB site. This circuit demonstrates…
