Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LMH0341 Other Parts Discussed in Thread: LMH0044 Tool/software: Hi team,
we are using LMH0341 deserializer IC. What we do in my project is we are giving HD-SDI video signal directly without any input equalizer.
i saw some reference design…
Part Number: LMH0002 Other Parts Discussed in Thread: LMH0044 , , LMH0324 Hi team,
Whether LMH0002 and LMH0044 can transmit LVDS signals with rate of 100M at least 100m distance. If not, can you recommend a solution? Thank you in advance.
Best wishes
A…
Other Parts Discussed in Thread: LMH0044 , LMH0041 , LMH0318 The LMH0044 datasheet states that it can equalize up to 200 meters of Belden 1694A at 1.485 Gbps. The jitter for various cable lengths (with equalizer pathological) are stated a table.
At 140…
Other Parts Discussed in Thread: LMH0044 Hi , all
Let me ask you a question about LMH0044 .
Vsdo = 750 mVp-p is written on datasheet P3 , what is differential output standard ? LVPECL ?
Best regards.
Taichi
Other Parts Discussed in Thread: LMH0044 , LMH0394 , LMH0384 , LMH0344 Currently we are using an LMH0044 in one of our designs. For a new design we have coming up we need to use the same circuit but with the new design we need a -40 to 85C part.
Do you have…
Other Parts Discussed in Thread: LMH0002 , LMH0046 , LMH0044 , DS10BR254 Dear Sir
we have plan to do SDI extender and connect way as below:
SDI signal --->LMH0044---->LMH0046---->DS10BR254----> LMH0002*4
May we remove LMH0046 in our application…
Sonoki-san
Please contact me at mark.sauerwald@ti.com . I do have an IBIS model for the LMH0002, there is no model for the LMH0034, but there is a model available for the LMH0044 (similar device) which I could provide.
Mark Sauerwald
Other Parts Discussed in Thread: LMH0002 , SN65LVDS104 , LMH0344 , DS90CP22 , LMH0395 , LMH0044 Dear Sir, We want to receive a 270Mbps DVB_ASI stream driven by a LMH0002,
and fanout to two output. Since the cable is very short (less than 10cm), we are
considering…