Part Number: LMH0302 Tool/software: Hi
We have some questions related to the 3G SDI (LMH0302) functionality:
Can we use only one of the BNC outputs, either SDO+ or SDO-? If so, which one, SDO+ or SDO-, is recommended for use as the BNC output?
Do SDO…
Hi again,
Here you have pictures of the different signals. All of them are HD 1080i and all they correspond to a pattern of colores bars.
This first one is measured after reclocking:
Vmax ~= 400mV, Vmin ~= -400 mV -> Vpp ~= 800mV
And this next one…
Part Number: LMH0302 Tool/software: Hello
We have problems getting HD-format picture from LMH0302. And seems like eye diagram is not good:
Application is taken from datasheet, is there some component values that could be adjusted to get application…
Part Number: LMH0302 Other Parts Discussed in Thread: DS30BA101 Tool/software:
Is the BNC cable for LMH0-3002 available in 50 ohms? We have previously used 50 ohms, but if we need to use 70 ohms, we would need to prepare a new one. What would be the…
Hi Gareth,
We have three options:
1). LMH0307: This has the same functionality as GS2988.
2).There is also LMH0397 and LMH0318. These parts have the same functionality and more(integrated retimer).
3). Lastly, there is LMH1208: This part is 2.5V supply…
Part Number: LMH0302 Other Parts Discussed in Thread: LMH0344
We have a requirement to buffer a 50R single-ended PCB SDI signal into a 75R single-ended SDI signal suitable for coaxial cable drive. The goal is for there not to be any changes in signal…
Part Number: LMH0302 Other Parts Discussed in Thread: LMH0001 , DP83TC811 , , DS30BA101 my purpose is to connect the 100 ohm differential output of the phy chip to LMH0302, LMH0001 or others, so as to achieve IP network transmission over a single coaxial…
Other Parts Discussed in Thread: LMH0302 , LMH0307 , LMH0397 Hi Team
We need a two 3G - SDI outputs (1080p and 60FPS)
In our previous reference design for each SDI output, they used a separate driver IC (LMH0302). Please find the snippet for a better understanding…
Part Number: LMH0302 Other Parts Discussed in Thread: LMH0397 Can I use LMH0302 to drive a cable when the input is a singled ended 75 ohm input? Leave SDI# floating or terminate it with a 75 ohm to ground? Thanks!
Part Number: LMH0302
Hi,
Does TI have any solution for a differential SDI transmission via a 100R twisted pair cable? We need to transmit and receive an HD-SDI signal on short runs of TP cable (up to 3m).
Could we for example use the LMH0302 for the…
