Part Number: LMH0324 Hello,
Our customer has a question about LMH0324 control or access register at VIN=VDDIO=1.8V use case.
As he understands that only SPI si able to support in VIN=VDDIO=1.8V whereas SPI and SMBus are able to support in VIN=VDDIO…
Part Number: LMH0324 Hello,
As we discussed another e2e thread ( https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1599930/lmh0324-eye-waveform-in-vin-vddio-1-8v ) before, our customer understood the eye looks same in 1.8V VIN and…
Part Number: LMH0324 Hello,
Our customer has a question to present LMH0324 eye waveform plot at VIN=VDDIO=1.8V. Even though the datasheet presented VIN=VDDIO=2.5V case, he needs to know VIN=VDDIO=1.8V condition.
Would it be possible to share the eye…
Part Number: LMH0318 Other Parts Discussed in Thread: LMH0324 Hello,
I am having issues with signal integrity with the LMH0318. I have a PCB with four identical circuits using these parts, however, when it comes to testing them I have found that some…
Part Number: LMH0324 Tool/software: Hello everyone!
I would like to know if is possible has a video signal out in USB-C connector and how I can to do it?
The idea is has a one input SDI 3G and this signal is replicated to the USB-C connector.
How…
Part Number: LMH0324 Tool/software: Hi Nick,
Due to layout constraints, we need to connect the positive signal of the differential signal to IN- pin and the negative signal to IN+ pin. Would this cause any issues? The connections are as follows:
positive…
Part Number: LMH0324 Tool/software: I'm using the LMH0324 as an SDI signal input buffer, fed directly from an SDI cable. My setup involves three boards housed within an enclosure. The BNC connector needs to be mounted on Board 1 (B1), but the LMH0324…
Part Number: LMH0324 Hi
I have a question regarding the CD_N pin of LMH0324.
Which signal does the CD_N pin detect? I'm assuming it detects the IN0+,IN0- signals. Is this a problem?
Best regards.
