Part Number: LMH0356 Hi there,
I'm looking to design and build a 4:1 SDI input mux for a university project. From research the LMH0356 looks to be my best option for this, however, I'm fairly new to electronics, and so I'd like to build this circuit on…
Hi Babu,
1). Yes same input input is routed to both outputs.
2). Both outputs are active. Through the register you can mute the un-wanted output.
Please note there is also LMH0356 with the same functionality as well. What is the reason for not using LMH0356…
Part Number: LMH0356 Other Parts Discussed in Thread: LP5907 Hi to all!
I have some troubles with starting of LMH0356 27MHz clock generator.
I already checked circuit, 39pF capacitors, tried two different crystals - 7B-27.000MBBK-T, TXC and other in HC…
Other Parts Discussed in Thread: LMH0376 , LMH0356 We have a fibre-optic receiver board receiving HD-SDI (SMPTE292) video data. The output of the fibre transceiver is fed directly into channel 0 of the '356. The output goes to a buffer amplifier then…
Other Parts Discussed in Thread: LMH0366 , LMH0356 Hi all,
The MADI characteristic of LMH0366 (one input) 1) eye-patterns monitor. Although I had capture of 3G-SDI photographed last time Can you capture in AES-10 (MADI) 125MBit/sec?
2) Gitta zone At LMH0356…
Hi all,
The MADI characteristic of LMH0366 (one input) 1) eye-patterns monitor. Although I had capture of 3G-SDI photographed last time Can you capture in AES-10 (MADI) 125MBit/sec?
2) Gitta zone At LMH0356 , it is SPI communication. Jitter Transfer…
Greetings,
At 3Gbps data rate, we should not connect outputs in parallel.
Suggestion is to use four LMH0324 or LMH0344 and then send outputs to DS25CP104 - 4X4 LVDS cross point. LMH0324 has better performance and lower power consumption than LMH0344.Also…
Other Parts Discussed in Thread: LMH0344 , LMH0356 , LMH0318 , LMH0324 Hi,
Can you suggest me the best possible solution w.r.t. cost and area for a 2:1 Mux for SD/HD/3G-SDI interface?
FYI, the 2 input SDI signals are provided from an external source over…
