Search tips
Showing 67 results View by: Thread Post Sort by

  • LMH0387: LMH0387

    TI Thinks Resolved
    Part Number: LMH0387 Other Parts Discussed in Thread: LMH0397 Hi, We are using LMH0387 on our custom board. In our tests, we are trying to capture the HDSDI image that we produced using the LMH0387 again with the LMH0387. Even though we performed registers…
    • Answered

  • LMH0387: Coax output voltage for LMH0387

    Resolved
    Part Number: LMH0387 Hi, 1. The part LMH0387 mentions output voltages between 720 and 880 mVpp. Am I correct to assume that this is the nominal range of operation and I can't go much lower or higher that that? I'm looking for a part that is able to go…
    • Resolved
    • Answered

  • LMH0387: LMH0387 and LMH0303 s-parameter models and return loss network

    Resolved
    Part Number: LMH0387 Other Parts Discussed in Thread: LMH0397 , LMH0318 , LMH0303 Could you provide S-parameters for the following pins? (Because they want to use it to simulate return loss.) BNC_IO pin of LMH0387SL/NOPB (number 8 pin) LMH0303SQ/NOPB…
    • Resolved

  • LMH0387: Is there a replacement part

    Part Number: LMH0387 We wish to make a new run of an ol product. I uses 4 LMH0384SE equalizers. There i no stock and the lea is 100 weeks. Is there replacement part
    • Answered

  • LMH0387: Regarding value of RREF

    Resolved
    Part Number: LMH0387 Hi support team. We would like to adjust 800mV the amplitude of BNC_IO output. What should be the value of RREF? We observed 720mV with RREF=680ohm. Best regards, Higa
    • Resolved
    • Answered

  • LMH0387: Can LMH0387 achieve compatibility with MADI specifications?

    Resolved
    Part Number: LMH0387 Other Parts Discussed in Thread: LMH0397 Hi Team, Can LMH0387 achieve compatibility with MADI specifications? The following application note doesn't show LMH0387 information. https://www.ti.com/lit/an/snla299/snla299.pdf Best Regards…
    • Resolved

  • LMH0387: LMH0387

    TI Thinks Resolved
    Part Number: LMH0387 Other Parts Discussed in Thread: LMH0397 , Our question: The pdf states that no metal / trace should be under the chip. Does this mean that the ground plane on inner layers and all layers must be open under the chip? Best regards,…

  • RE: LMH0050: LMH0050

    Greetings, 1)/ Suggestion is to first use LMH0324 or LMH0384 instead of LMH0387. This is because you just need an equalizer. LMH0387 has more functionality and it is not needed in this application. 2). You do not need LVDS to CML converter. Please AC…
    • Answered

  • LMH0387: Extended 3G Reach Mode Using 75 ohm RG179 cable and LMH0387 on SD387EVK Dev Board Kit

    Resolved
    Part Number: LMH0387 Other Parts Discussed in Thread: ALP , DP83867E , LMH0397 , LMH0324 I am using the LMH0387 Line Drivers on the SD387EVK dev board kit and trying to test the extended 3G reach mode to see the max length we can push SGMII and Ethernet…
    • Resolved
    • Answered

  • LMH0387: LMH0378 set up for SD-SDI communication

    Resolved
    Part Number: LMH0387 Hi, I'm using 2 LMH0387 devices as a receiver and transmitter and them work properly when I set them up for HD-SDI communication. Now I want configure LMH0387s for SD-SDI but the transmitter does not work. The pin SD/HD is HIGH. This…
    • Resolved

Didn't find what you are looking for? Post a new question.