Part Number: LMH1228 Tool/software: Hi Team,
I would like to evaluate the return loss. Do you have a term model (Spara) for the LMH1228?
Do you also have an IBIS-AMI model?
Regards,
Tetsuya
Part Number: LMH1228 Hi everyone
Overvoltage and undervoltage I would like to know what the effects of overvoltage and undervoltage are on the LMH1228 and whether these same effects apply to other devices in the LMH line.
Thanks, Marcelo
Part Number: LMH1228 Other Parts Discussed in Thread: LMH1297EVM Hi everyone
I'm trying to lock each of the outputs, SDI_Out1 and SDI_Out2, with different slew rates following tables 3.14.5.2.1 and 3.14.5.2.2 in the programming manual. I did a test…
Hi Marcelo,
Since Nasser is out of office I will support in the meantime.
As Nasser mentioned earlier, what might help your design is using the LMH1297 EVM. With the LMH1297 EVM GUI, you would be able to program and see the status of the registers in…
Part Number: LMH1228 Other Parts Discussed in Thread: LMH1297 , Can LMH1228 be used like LMH1297?
Meaning SDI_OUT1+ as an input just like SDI_IO+ receive from a SDI source and mux the signal to OUT0+/-?
If yes, how to configure the register?
Thanks,
Jo…
Part Number: LMH1228
Hello, I encountered a problem when using LMH1228:
I try to use LMH1228 Reclock,but i never turn it on,it be used Bypass mode;
I try to setup 0x1C ,but it always seems to be Unlock mode, but it always seems Bypass mode 。
I try to set…
Part Number: LMH1228 Hi team
Could you help give the connect guidance for the following unused pins?
pin#7 SDI_OUT+
pin#8 SDI_OUT-
pin#22 OUT+
pin#23 OUT-
Part Number: LMH1228 Other Parts Discussed in Thread: LMH1227 , Hi support teams,
Our custmer use LMH1227(LMH1228).
If they connect a bad quality SGI cable, LMH1227 was broke down.
Thie reason might be that the gnd is floting, then unexpected current flows…
Part Number: LMH1228
Hello Support team,
I could find below description regarding SMBus address pins.
Could you let me know the timing definition to read ADDR[1:0] at power up process?
If you can show the timing chart with voltage level of VIN, it is…