Part Number: LMT88 Other Parts Discussed in Thread: LMT89 Good afteenoon.
We need to know if these part numbers are washables?
TEXASINS
LMT88DCKR
TEXASINS
LMT88DCKT
TEXASINS
LMT89DCKR
TEXASINS
LMT89DCKT
TEXASINS…
Part Number: LMT88 Hello Team,
on the first page of the LMT88 datasheet, is written that the max. error is as below:
The temperature error increases linearly and reaches a maximum of ±2.5°C at the temperature range extremes
on the table paragraph…
Other Parts Discussed in Thread: LMT88 Team can you please add LMT88 on Altium on high priority
Please this is quite urgent as we have a board to be ready for Schneider
Other Parts Discussed in Thread: LMT88 Problem: On a new design I use the LMT88 to measure the local PCB temperature. The LMT88 connected as described on datasheet, except pint 2 NC. The output of the LMT88 is ~3.22V constant value, not depended of the…
Dear Sara -
the formula for converting the output voltage of the LMT88 to temperature (in C) , with a worked example first shows up on pages 7 and 8 of the LMT88 datasheet.
http://www.ti.com/lit/ds/symlink/lmt88.pdf
following that section is also…
Other Parts Discussed in Thread: LMT88 , LMT89 , MSP430G2553 We are a medical device manufacturer who makes a blood analyzer that in its original design used the TI LMT88 for ambient temperature sensing.
In a more recent pilot manufacturing run, we…
Part Number: LMT86 Other Parts Discussed in Thread: TMP235
Team,
Apart from the different LMT86 OPNs ( LMT86 vs LMT86-Q1 ) do we have some P2P dropped-in alternatives for LMT86QDCKRQ1 ? Apart from the mV/Deg C difference what would need to be taken…
Other Parts Discussed in Thread: LMT88 Hi,
In the datasheet for LMT8x there is description of the "Simple Shutdown Connection" where the LMT8x supply is connected to the gate output.
I'm looking for voltage threshold which guarantee the shudown of…
Hi Seishin,
The Class-AB output (LMT84-87) also known as the push-pull output. It uses a pair of active devices NPN and PNP BJT. Basically, it can sink or source current to the load. On the other hand, Class-A (LMT88-89) is only source current.
Hope…
