Part Number: LP-AM243 Other Parts Discussed in Thread: LP-XDS110 Hi, On the LP-AM243 (PROC109A), I noticed that the USB debug (UART and JTAG) uses the TM4C1294NCPDTT3R.
I have a couple of questions regarding the USB debug circuit:
Could we use…
Part Number: LP-AM243 Dear Texas Instruments Support Team,
I am working with the LP-AM243 (AM243x General-Purpose LaunchPad™ Development Kit for Arm®-based MCU) and need access to the complete hardware design source files.
The design package currently…
Part Number: LP-AM243
Hi,
I am currently working with the LP-AM243 board and have a requirement to use two cores for my application. I intend to run a CANopen master on Core 0 and Ethernet on Core 1. I have already checked and tried the "IPC Shared…
Part Number: LP-AM243 I am interested in the LP-AM243 (AM243x MCU-based) platform for my industrial communication applications, especially for protocols such as EtherNet/IP and EtherCAT.
Could you please let me know whether there are official AM243x…
Part Number: LP-AM243 Hi,
I am using an AM243x-LP with MCU+ SDK 12.01.00.33. When I run the following SDK example without any modifications,
ospi_flash_dma_lld_am243x-lp_r5fss0-0_nortos_ti-arm-clang
it fails at: status = OSPI_norFlashWaitReady(hOspi…
Hi Teja,
Teja Rowthu said: I was able to run the tests, but for some reason, the tests aren't running longer than 2-3 minutes.
Maybe I was being too conservative; in my case, the issue usually shows up within 2 - 3 minutes as well.
However, CPSW…
Part Number: LP-AM243 Other Parts Discussed in Thread: AM2434 AM2434 supports both Ethercat and EtherNET/IP. I just want to know weather current MCU can use two different protocols on its two network controllers and serve as a gateway between them.
…
Part Number: AM2434 Other Parts Discussed in Thread: SYSCONFIG Hi Team,
I am using AM2434 for developing EtherNET/IP adapter application on custom board.
I am using example project ind_comms_sdk_am243x_09_02_00_24\examples\industrial_comms\ethernetip_adapter_demo…