Part Number: TIDA-00961 Other Parts Discussed in Thread: LP2986 Hi,
Can you please confirm the component U304 used in the circuit is LP2986AIMM-3.3/NOPB. The pitch mentioned in the gerber is 0.65mm which is for the SSOP Package ICs only. But no SSOP…
Hi Sara,
Welcome to E2E forums!!
1) If using as a basic LDO can I leave VTAP open circuited or does it have to be tied to FB pin. The datasheet says for fixed operation it should be tied to FB. For adjustable version I can't see any application hints…
Hi,
I haven't used this device before, but looking at the datasheet, OSC freq seems already reaches near its final value even with lowest Vin level(1.5V) assuming FC is connected to V+. So I think you can model the starting point of high freq much earlier…
Hi Patrick,
For the second question, as the below TIDA-00961 guild book said, that if you run the project in open loop, you should make sure that INCR_BUILD is set to 1, DEMO_MODE is set to 0, and DC_CHECK is set to 1 in the pfc2philtrmttpl_settings…
From the LM2832 Data Sheet (attached) with regard to WSON - 6 package power pad:
The PCB size, weight of copper used to route traces and ground plane, and number of layers within the PCB can greatly effect Rthermal. The type and number of thermal vias…
